Q'Straint M-208-A30 — Mixed Manual Wheelchair Securement Kit for A-Track. A complete 4-point manual securement kit for A-Track floor anchorage systems featuring two distinct buckle types: two over-center buckle straps (MA-110/111-C) and two cam buckle straps (MA-210/11-C). The mixed configuration provides maximum versatility — over-center buckles for positive rear locking, cam buckles for fast front tensioning. Part of Q'Straint's M-Series: economical, crash-tested, and built for fleet compliance.
⚠ A-Track Lead Time Notice — Please Read Before Ordering
A-Track wheelchair securement systems are largely being phased out by manufacturers. As a result, anticipate a 3-day lead time when ordering this kit. If you are building a new accessible vehicle, we recommend considering an L-Track system for better long-term parts availability. Questions? Call our specialists at 800.884.6456.
✓ FREE SHIPPING
Q'STRAINT
SKU: M-208-A30
M-Series
2-Year Warranty
A-Track
Manual Wheelchair Securement Kit
for A-Track | M-208-A30
The M-208-A30 delivers a complete 4-point A-Track wheelchair securement solution with two buckle types in a single kit. Two over-center buckle straps handle rear attachment where positive locking under load is critical, while two cam buckle straps enable fast front tensioning and release. Both types mount directly to A-Track floor rails with the same J-hook attachment to the wheelchair frame — a practical, versatile kit for vehicles with existing A-Track installations.
Key Features
4️⃣
Complete 4-Point Mixed Kit
Two over-center + two cam buckle straps — all four tie-down positions covered in a single purchase. Nothing additional required for a complete A-Track installation.
🔁
Over-Center Buckle (2 Straps)
Provides a positive mechanical lock under load — the buckle action creates increasing holding force as tension is applied. Accommodates a wide range of track layouts and wheelchair sizes.
⚡
Cam Buckle (2 Straps)
Fast tensioning and release — pull to tighten, lift the cam to release. The cam buckle is the fastest manual buckle design for rapid boarding and alighting sequences.
🪝
J-Hook on All 4 Straps
Both buckle types use the same patented J-Hook attachment — reduces belt twisting and attaches securely to virtually any wheelchair frame, including scooters.
🛤️
A-Track Fittings on All 4 Straps
All four straps mount directly into A-Track floor rails — no adapter hardware required. Compatible with standard A-Track systems found in older-generation mobility vans and transit vehicles.
♿
Universal Wheelchair Design
Accommodates virtually all manual wheelchair designs, including scooters and non-standard frames — providing coverage for mixed passenger populations.
💥
30mph / 20G Crash Tested
M-Series straps meet the 30mph/20G crash test standard — delivering the structural performance required for transit wheelchair securement.
💰
Cost-Effective M-Series Platform
Q'Straint's M-Series is engineered for minimum-specification compliance and cost-conscious fleet budgets — professional-grade securement at a fraction of the cost of retractor systems.
M-208-A30 vs. M-201-A30 — Which A-Track Kit?
| Feature |
M-208-A30 — $172.50 ← You Are Here |
M-201-A30 — $172.50 |
| Straps Included |
2 over-center + 2 cam buckle |
4 over-center buckle straps |
| Buckle Type |
Mixed (cam front / over-center rear) |
Uniform (all over-center) |
| Best For |
Front/rear differentiation by buckle type |
Simplified single-type operator training |
| Price |
|
Price |
86.95 |
$172.50 |
What's Included
| Qty |
Component |
Description |
| 2 |
MA-110/111-C |
M-Series Manual Wheelchair Tie-Down with Over-Center Buckle, J-Hook & A-Track End Fitting |
| 2 |
MA-210/11-C |
M-Series Manual Wheelchair Tie-Down with Cam Buckle, J-Hook & A-Track End Fitting |
| ⚠ Occupant restraint (lap and shoulder belt) required to complete a full WTORS — sold separately. This kit provides wheelchair tie-downs only. |
Vehicle Applications
School Bus
Minivan / WAV
Community Transport
Paratransit
NEMT Van
Standards & Compliance
| Standard |
Description |
| FMVSS 209 / 210 / 302 |
Federal Motor Vehicle Safety Standards — Seat Belt Assemblies, Anchorages & Flammability |
| FMVSS 222 |
School Bus Passenger Seating & Crash Protection |
| ADA |
Americans with Disabilities Act — for use in ADA-compliant accessible transportation |
| SAE J2249 / ISO 10542* |
Wheelchair Tie-Down and Occupant Restraint Standards — *Not all M-Series configurations meet this standard. Contact us to confirm compliance for your specific application. |
Warranty
2-Year Limited Warranty (M-Series)
The M-208-A30 is covered by Q'Straint's 2-year limited warranty as part of the M-Series product line. Registration is required for full warranty coverage. Visit wheelchairstrap.com/pages/warranty-information for full terms and registration details.
Specifications
| SKU / Part Number |
M-208-A30 |
| Series |
M-Series Manual Securement |
| Kit Contents |
2x MA-110/111-C (over-center) + 2x MA-210/11-C (cam buckle) |
| Buckle Types |
Over-Center (2 straps) + Cam Buckle (2 straps) |
| Hook Type |
J-Hook (all 4 straps) |
| Floor Anchorage |
A-Track fitting (all 4 straps) |
| Crash Testing |
30mph / 20G |
| Chair Compatibility |
Virtually all wheelchair designs, including scooters |
| Lead Time |
3 business days (A-Track product) |
| Warranty |
2-Year Limited (registration required) |
| Price |
$172.50 — Free Shipping |
⚠ California Prop 65 Warning: This product can expose you to chemicals including lead and/or other substances known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit
www.P65Warnings.ca.gov.
Frequently Asked Questions
▸ Why does this kit include two different buckle types?
The M-208-A30 is designed to provide a practical front/rear split: the over-center buckle straps (MA-110/111-C) are typically used at the rear tie-down positions, where their positive mechanical locking action under load is preferred. The cam buckle straps (MA-210/11-C) are used at the front positions, where their fast pull-to-tension and quick-release action speeds up boarding and alighting. If you prefer a uniform strap type at all four positions, see the
M-201-A30 (4 over-center, same price).
▸ Can I buy individual replacement straps from this kit?
Yes. The cam buckle straps in this kit are available individually as the
MA-210/11-C ($55.00 each). Call us at 800.884.6456 for pricing on individual MA-110/111-C over-center straps.
▸ What lap belt and shoulder belt work with this kit?
A complete Wheelchair Tie-Down and Occupant Restraint System (WTORS) requires a separate occupant restraint — a lap belt and shoulder belt for the passenger. We carry A-Track-compatible occupant restraint options; call our specialists at 800.884.6456 or visit the
Occupant Restraints collection to find the correct configuration for your vehicle.
Related Products
Questions about A-Track compatibility? We're here.
Authorized Q'Straint dealer — fleet, school bus, and NEMT specialists.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish