NEMT Securement
Why NEMT Fleets Choose WheelchairStrap.com
Every product we carry is selected specifically for the demands of high-cycle NEMT operations — fast to use, easy to document, and built to hold up across thousands of trips.
⚡
Under-60-Second Securement
Retractable tiedowns and electrical retractor systems designed for high-cycle daily operations. Less time securing = more trips per shift.
📋
Audit-Proof Documentation
SAE J2249 certified hardware + free compliance checklist and installation guides. Everything your Medicaid broker or state inspector needs to see.
🚐
Fleet Pricing Available
Volume discounts for 5+ vehicle fleets. Free compliance checklist included. One call sets up your entire fleet — 800.884.6456.
🔒
Q'Straint · AMF Bruns · Sure-Lok
We carry the three brands specified in most state NEMT contracts — not off-brand alternatives. The right hardware the first time.
📦
Ships Fast — Ready to Install
Free standard shipping on orders over $100. Kits include everything needed for a complete wheelchair securement position — open box, install, done.
🎓
Expert Support
Not sure which system fits your vans? Call us. We match your vehicle type, floor track, and state program requirements to the right products every time.
NEMT Wheelchair Securement — Key Requirements & Standards
4-Point Tie-Down System
The universal standard for securing the wheelchair. Two straps attach to the front of the wheelchair frame and two to the rear, anchoring to the vehicle floor to prevent movement in any direction.
Occupant Restraint Required
A separate, crash-tested lap and shoulder belt (3-point system) must secure the passenger within the wheelchair. Wheelchair tie-downs cannot be used as a passenger restraint — both systems are required.
WC18/WC20 Certification
Tie-down and restraint systems should be WC18 or WC20 crash-tested and certified. WC18-compliant products are clearly labeled throughout our NEMT collection.
WC19 Wheelchair Recommended
It is recommended that the wheelchair itself be WC19 certified — meaning it has reinforced, designated securement points built into the frame specifically designed for transport tie-down attachment.
Minimum Clear Floor Space
A minimum clear floor area of 30 × 48 inches is required for each wheelchair securement position in the vehicle.
Minimal Movement Standard
When properly secured, the wheelchair should not move more than 2 inches in any direction during transit under normal operating conditions.
Force Resistance Requirements
Understanding the Standards — WC18, WC19, and WC20
| Standard | What It Covers | Who It Applies To |
|---|---|---|
| WC18 | Performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). Crash-tested at 48 km/h with 20g deceleration using the actual wheelchair the system is designed to secure. | Tie-down retractors, occupant belts, floor anchorage — the securement hardware |
| WC19 | Requirements for wheelchairs used as seats in motor vehicles. WC19-certified wheelchairs have reinforced, designated securement points built into the frame for safe tie-down attachment. | The wheelchair itself — not the securement hardware |
| WC20 | An updated and expanded version of WC18, addressing additional securement configurations and real-world crash scenarios. WC20-compliant products provide the highest level of crash-test certification currently available. | Tie-down systems and occupant restraints — next generation of WC18 |
The Three Components of a Complete NEMT Securement System
- Wheelchair Tie-Down (4-Point Securement) — Four retractors or straps anchoring the wheelchair frame to the vehicle floor. Must individually withstand 2,000 lbs of force and collectively handle 4,000 lbs. Available in manual, retractable, and electric configurations.
- Occupant Restraint (Lap & Shoulder Belt) — A separate crash-tested 3-point belt system securing the passenger within the wheelchair. Required in addition to the tie-down — the wheelchair tie-down cannot serve as an occupant restraint.
- Floor Anchorage System — L-track, A-track, Slide N' Click, or bolt-in hardware providing the secure vehicle floor attachment points for the tie-down system. Must be properly installed by a qualified upfitter.
Find the Right NEMT Securement System
Not sure which system is right for your vehicle and operation? Use our Wheelchair Securement System Configurator to get a tailored product recommendation in minutes — or call our NEMT specialists at 800.884.6456. We work with NEMT operators, Medicaid transport providers, and fleet managers nationwide and can help you select the correct WC18-compliant system for your specific vehicle at no charge.
NEMT Starter Kits
Complete, ready-to-install systems for every NEMT van configuration. Each kit includes everything needed for one full wheelchair securement position.
Shop NEMT Products by Category
Not ready for a kit? Shop individual components below. All products are selected for NEMT suitability — high-cycle durability, fast deployment, and SAE J2249 compliance.
Wheelchair Tiedowns
4-Point Retractable Tiedown Systems
The core of every compliant NEMT securement position. Retractable systems from Q'Straint, AMF Bruns, and Sure-Lok in L-Track and Slide 'N Click configurations.
Shop Tiedowns →Electrical Retractors
Power Retractor Systems for Solo Drivers
One-button deploy and retract. Ideal for solo drivers doing 15+ trips daily. Reduces fatigue, speeds up securement, and eliminates manual strap handling.
Shop Electrical Retractors →Occupant Restraints
Lap & Shoulder Belts for NEMT
ADA and FMVSS 208-compliant lap-and-shoulder assemblies. Required at every wheelchair position — the tiedowns secure the chair; these secure the person.
Shop Occupant Restraints →Floor Anchorage
L-Track, Slide 'N Click & Mounting Hardware
The foundation of every securement position. FMVSS 210-compliant floor track systems that connect to the vehicle's structural frame for rated load performance.
Shop Floor Anchorage →Complete Kits
All-in-One WTORS Kits — Open Box, Install, Done
Everything for one complete wheelchair position in a single box. The fastest way to equip or re-equip a NEMT van and the easiest way to ensure no components are missing.
Shop All Kits →Docking Systems
QLK Single-Point Docking for Power Wheelchairs
For NEMT fleets with consistent power wheelchair ridership. Faster than four-point straps when paired with compatible wheelchairs. SAE J3027 performance benchmark.
Shop Docking Systems →Compliance Note
All wheelchair securement hardware sold by WheelchairStrap.com is sourced from manufacturers whose products meet SAE J2249 performance requirements. NEMT operators are additionally subject to state Medicaid program rules that vary by state — requirements in all 50 states are covered in our Compliance Resource Center.
Free downloadable resources: State NEMT Regulations Guide (all 50 states) · Daily Pre-Trip Checklist · Installation Guides
Fleet Pricing
Fleet Quote — 5 or More Vans
Volume discounts available for fleets of 5 or more vehicles. Tell us your van count, floor track type, and state program requirements and we'll put together the right package with pricing.
Company / Fleet Name
Enter company name
Number of Vehicles
5, 10, 25, 50+
State(s) of Operation
e.g. Florida, Texas
Floor Track Type
L-Track / Slide 'N Click / Unknown
Note: The form above is a visual preview. To request a fleet quote, use one of the options below:
Products from Brands NEMT Programs Specify
Most state NEMT Medicaid contracts and broker programs reference specific manufacturer brands by name. We carry all three.
Q'Straint
QRT series retractors, Quantum Slide 'N Click, electrical systems, occupant restraints, and combo kits.
Shop Q'Straint →AMF Bruns
ArcSystem retractors, L-Track and Slide 'N Click configurations, occupant restraints, and combo kits.
Shop AMF Bruns →Sure-Lok
SL series retractors, L-Track kits, occupant restraint assemblies, and complete WTORS combo kits.
Shop Sure-Lok →Free Resources for NEMT Operators
Not sure which system is right for your fleet?
Our specialists match your van, floor track, and state program to the right products. One call does it.
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish