What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

A - Track Mounting Hardware | Q8 - 6500 - A - WheelchairStrap.com

Q'Straint A-Track Mounting Hardware | Q8-6500-A

Vendor: Q'Straint
Regular price: $38.00
Sale price: $38.00
Unit price: per

Shipping calculated at checkout.

Q'Straint Q8-6500-A — A-Track Mounting Hardware for QRT Retractors. The Q8-6500-A is the floor-side fitting that connects Q'Straint QRT wheelchair securement retractors to A-Track (E-Track) floor rails. Whether replacing a worn fitting, installing a QRT retractor in an existing A-Track-equipped vehicle, or adding additional retractor positions, the Q8-6500-A provides the secure, click-in anchor point your QRT retractor needs.

⚠ A-Track Lead Time Notice — Please Read Before Ordering

A-Track hardware and accessories are being phased out by manufacturers. As a result, anticipate a 3-day lead time when ordering this item. If you are building a new accessible vehicle, we recommend an L-Track floor anchorage system for better long-term parts availability. Questions? Call our specialists at 800.884.6456.

Free Shipping on Orders Over $100 Q'STRAINT SKU: Q8-6500-A Floor Anchorage Hardware A-Track / E-Track 1-Year Warranty

A-Track Mounting Hardware for QRT Retractors
Q8-6500-A | E-Track Compatible

The Q8-6500-A mounts directly into A-Track (E-Track) floor rails and provides the floor-side anchor point for Q'Straint QRT wheelchair securement retractors. The click-in metal fitting locks positively into the A-Track slot, creating a stable, load-bearing connection between your QRT retractor and the vehicle floor. Sold individually — order the exact quantity needed for your installation.

Key Features

🛤️

A-Track / E-Track Compatible

Designed specifically for A-Track rail systems (also called E-Track). Slides directly into the standard A-Track slot and locks positively in place — no adapter hardware or drilling required.

🔗

QRT Retractor Series Compatible

Provides the floor-side anchor point for all Q'Straint QRT series retractors — QRT Standard, QRT Deluxe, and QRT Max. Allows QRT retractors to be used in vehicles equipped with A-Track flooring.

🔩

Metal Construction

Durable metal fitting built for the load requirements of wheelchair securement. Rated to work with crash-tested QRT retractor systems for daily transit and fleet use.

👆

Click-In Mounting Design

Secure click-in installation — slides into A-Track rail and positively locks without tools. Provides a stable, rattle-free anchor point for the retractor during both normal operation and emergency events.

🔄

Replacement or New Install

Sold individually — use as a direct replacement for a worn or damaged A-Track fitting, or order multiple units for a new QRT retractor installation in an A-Track-equipped vehicle.

✅

Essential Anchorage Hardware

Required hardware when mounting QRT retractors to A-Track floor rails. If you're adding QRT retractors to an A-Track vehicle, you need one Q8-6500-A per retractor position.

What's Included

Qty	Component	Description
1	Q8-6500-A	Q'Straint A-Track Mounting Hardware — Metal click-in fitting for QRT retractor A-Track installation (1 unit)
ℹ A complete 4-position wheelchair securement installation requires one fitting per retractor — order quantity equal to the number of retractor positions being installed or replaced.

Vehicle Applications

School Bus (A-Track) Minivan / WAV Paratransit NEMT Van Community Transport (A-Track)

Standards & Compliance

Standard	Description
ADA	Americans with Disabilities Act — for use in ADA-compliant accessible transportation systems
FMVSS 222	School Bus Passenger Seating & Crash Protection (when used with compatible retractor systems)

For state-by-state compliance requirements and fleet documentation resources, visit our Compliance Resource Center.

Warranty

1-Year Limited Warranty

The Q8-6500-A is covered by Q'Straint's 1-year limited warranty against factory defects in materials and workmanship. Visit wheelchairstrap.com/pages/warranty-information for full terms, or call us at 800.884.6456 for warranty assistance.

Specifications

SKU / Part Number	Q8-6500-A
Category	Floor Anchorage / Mounting Hardware
Compatible Retractors	Q'Straint QRT Standard, QRT Deluxe, QRT Max
Floor Anchorage Type	A-Track (E-Track) — click-in fitting
Construction	Metal (silver finish)
Quantity	1 fitting (sold individually)
Lead Time	3 business days (A-Track product)
Warranty	1-Year Limited
Price	$38.00 — Free Shipping on Orders Over $100

⚠ California Prop 65 Warning: This product can expose you to chemicals including lead and/or other substances known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

▸ Which QRT retractors does this fitting work with?

The Q8-6500-A works with all Q'Straint QRT series retractors: QRT Standard (Q8-6201), QRT Deluxe (Q8-6200), and QRT Max (Q8-6209). One Q8-6500-A is required per retractor. A standard 4-retractor wheelchair securement position requires 4 fittings.

▸ Is A-Track the same as E-Track?

A-Track and E-Track are different names for the same standard floor rail system — a slotted steel rail that accepts sliding fittings and locks them at any position. The Q8-6500-A is compatible with standard A-Track / E-Track profiles found in older-generation mobility vehicles and transit vans.

▸ Should I upgrade to L-Track instead of A-Track?

If you are building or retrofitting a vehicle, L-Track is the current standard with better long-term parts availability. A-Track parts like the Q8-6500-A are still available but subject to lead times as manufacturers phase out A-Track production. For new installations, we recommend L-Track floor anchorage. Call us at 800.884.6456 for a recommendation.