What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Manual Wheelchair Securement Kit for A - Track | M - 201 - A30 - WheelchairStrap.com

Q'Straint Manual Wheelchair Securement Kit for A-Track | M-201-A30

Vendor: Q'Straint
Regular price: $172.50
Sale price: $172.50
Unit price: per

Shipping calculated at checkout.

Q'Straint M-201-A30 — Manual Wheelchair Securement Kit for A-Track. A complete 4-point manual securement kit designed for vehicles equipped with A-Track floor anchorage systems. Includes four over-center buckle tie-down straps with J-hooks and A-Track end fittings — everything needed to secure a wheelchair at all four attachment points. Part of Q'Straint's M-Series: purpose-built for cost-conscious fleets and minimum-specification compliance without sacrificing passenger safety.

⚠ A-Track Lead Time Notice — Please Read Before Ordering

A-Track wheelchair securement systems are largely being phased out by manufacturers. As a result, anticipate a 3-day lead time when ordering this kit. If you are building a new accessible vehicle, we recommend considering an L-Track system for better long-term parts availability. Questions? Call our specialists at 800.884.6456.

✓ FREE SHIPPING Q'STRAINT SKU: M-201-A30 M-Series 2-Year Warranty A-Track

Manual Wheelchair Securement Kit
for A-Track | M-201-A30

The M-201-A30 is Q'Straint's complete 4-point manual securement solution for A-Track floor anchorage systems. Four matching over-center buckle straps with J-hooks provide a uniform, easy-to-manage kit for vehicles already equipped with A-Track rails — delivering reliable wheelchair securement for transit vans, paratransit vehicles, and wheelchair-accessible fleets at a cost-effective price point.

Key Features

4️⃣

Complete 4-Point Kit

All four tie-down straps included — everything needed for a complete A-Track wheelchair securement installation. No additional strap purchases required.

🔁

Uniform Over-Center Buckles

All four straps use matching over-center buckles — ideal for fleets that prefer a single, consistent strap type at all four tie-down positions for simplified operator training.

🎯

Over-Center Buckle Tensioning

The over-center buckle design provides a positive lock and accommodates a wide range of track layouts and wheelchair sizes — one hand motion to tension and secure.

🪝

J-Hook Attachment

Patented J-Hook design reduces belt twisting and allows fast, sturdy attachment to virtually any wheelchair frame — including scooters and non-standard mobility devices.

🛤️

A-Track End Fitting

A-Track fittings mount directly into existing A-Track floor rail systems — no additional hardware required. Compatible with all standard A-Track configurations found in older generation mobility vans.

♿

Universal Wheelchair Design

Accommodates virtually all manual wheelchair designs as well as scooters — compatible with a broad range of chair frames for diverse passenger populations.

💰

Cost-Effective Manual System

Part of Q'Straint's M-Series — specifically designed to meet minimum securement specifications for fleets requiring an economical solution without compromising on safety or crash-tested performance.

💥

30mph / 20G Crash Tested

M-Series straps are crash tested at 30mph/20G — meeting the force requirements necessary for transit wheelchair securement applications.

M-201-A30 vs. M-208-A30 — Which A-Track Kit?

Feature	M-201-A30 — $172.50 ← You Are Here	M-208-A30 — $172.50
Straps Included	4 over-center buckle straps	2 over-center + 2 cam buckle
Buckle Type	Uniform (all over-center)	Mixed (front cam / rear over-center)
Best For	Single strap type / operator simplicity	Mixed front-cam / rear over-center setup
Price	$172.50	$172.50

What's Included

Qty	Component	Description
4	MA-110/111-C	M-Series Manual Wheelchair Tie-Down with Over-Center Buckle, J-Hook & A-Track End Fitting
⚠ Occupant restraint (lap and shoulder belt) required to complete a full WTORS — sold separately. This kit provides wheelchair tie-downs only.

Vehicle Applications

School Bus Minivan / WAV Community Transport Paratransit NEMT Van

Standards & Compliance

Standard	Description
FMVSS 209 / 210 / 302	Federal Motor Vehicle Safety Standards — Seat Belt Assemblies, Anchorages & Flammability
FMVSS 222	School Bus Passenger Seating & Crash Protection
ADA	Americans with Disabilities Act — for use in ADA-compliant accessible transportation
SAE J2249 / ISO 10542*	Wheelchair Tie-Down and Occupant Restraint Standards — *Not all M-Series configurations meet this standard. Contact us to confirm compliance for your specific application.

For state-by-state compliance requirements and fleet documentation resources, visit our Compliance Resource Center.

Warranty

2-Year Limited Warranty (M-Series)

The M-201-A30 is covered by Q'Straint's 2-year limited warranty as part of the M-Series product line. Registration is required for full warranty coverage. Visit wheelchairstrap.com/pages/warranty-information for full terms and registration details.

Specifications

SKU / Part Number	M-201-A30
Series	M-Series Manual Securement
Kit Contents	4x Over-Center Buckle Tie-Down Straps (uniform)
Buckle Type	Over-Center (all 4 straps)
Hook Type	J-Hook
Floor Anchorage	A-Track fitting (all 4 straps)
Crash Testing	30mph / 20G
Chair Compatibility	Virtually all wheelchair designs, including scooters
Lead Time	3 business days (A-Track product)
Warranty	2-Year Limited (registration required)
Price	$172.50 — Free Shipping

⚠ California Prop 65 Warning: This product can expose you to chemicals including lead and/or other substances known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

▸ What is the difference between the M-201-A30 and the M-208-A30?

Both kits include 4 A-Track tie-down straps at the same $172.50 price. The M-201-A30 includes 4 uniform over-center buckle straps — all the same type at all 4 positions. The M-208-A30 includes a mixed set: 2 over-center buckle straps and 2 cam buckle straps. The M-201-A30 is often preferred when a single strap type for all positions makes operator training simpler. The M-208-A30 is preferred when different buckle types are desired for front vs. rear positions.

▸ Does this kit include an occupant restraint (lap belt and shoulder belt)?

No. The M-201-A30 provides wheelchair tie-down straps only — the 4 straps that secure the wheelchair to the vehicle floor. A complete Wheelchair Tie-Down and Occupant Restraint System (WTORS) also requires a lap belt and shoulder belt for the passenger. These must be purchased separately. Call us at 800.884.6456 for help selecting the correct occupant restraint for your A-Track configuration.

▸ My vehicle has A-Track. Should I replace with L-Track or stay with A-Track?

For vehicles already equipped with A-Track rails, the M-201-A30 is the right choice for replacement or additional positions. However, A-Track systems are being phased out by securement manufacturers, which means parts availability will continue to decrease over time. For new builds or vehicles undergoing major refits, we recommend transitioning to an L-Track system, which offers a broader range of current product options and better long-term parts support. Contact us at 800.884.6456 to discuss the best path forward for your fleet.