What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Manual Wheelchair Securement Kit for A - Track | M - 208 - A30 - WheelchairStrap.com

Q'Straint Manual Wheelchair Securement Kit for A-Track | M-208-A30

Vendor: Q'Straint
Regular price: $172.50
Sale price: $172.50
Unit price: per

Shipping calculated at checkout.

Q'Straint M-208-A30 — Mixed Manual Wheelchair Securement Kit for A-Track. A complete 4-point manual securement kit for A-Track floor anchorage systems featuring two distinct buckle types: two over-center buckle straps (MA-110/111-C) and two cam buckle straps (MA-210/11-C). The mixed configuration provides maximum versatility — over-center buckles for positive rear locking, cam buckles for fast front tensioning. Part of Q'Straint's M-Series: economical, crash-tested, and built for fleet compliance.

⚠ A-Track Lead Time Notice — Please Read Before Ordering

A-Track wheelchair securement systems are largely being phased out by manufacturers. As a result, anticipate a 3-day lead time when ordering this kit. If you are building a new accessible vehicle, we recommend considering an L-Track system for better long-term parts availability. Questions? Call our specialists at 800.884.6456.

✓ FREE SHIPPING Q'STRAINT SKU: M-208-A30 M-Series 2-Year Warranty A-Track

Manual Wheelchair Securement Kit
for A-Track | M-208-A30

The M-208-A30 delivers a complete 4-point A-Track wheelchair securement solution with two buckle types in a single kit. Two over-center buckle straps handle rear attachment where positive locking under load is critical, while two cam buckle straps enable fast front tensioning and release. Both types mount directly to A-Track floor rails with the same J-hook attachment to the wheelchair frame — a practical, versatile kit for vehicles with existing A-Track installations.

Key Features

4️⃣

Complete 4-Point Mixed Kit

Two over-center + two cam buckle straps — all four tie-down positions covered in a single purchase. Nothing additional required for a complete A-Track installation.

🔁

Over-Center Buckle (2 Straps)

Provides a positive mechanical lock under load — the buckle action creates increasing holding force as tension is applied. Accommodates a wide range of track layouts and wheelchair sizes.

⚡

Cam Buckle (2 Straps)

Fast tensioning and release — pull to tighten, lift the cam to release. The cam buckle is the fastest manual buckle design for rapid boarding and alighting sequences.

🪝

J-Hook on All 4 Straps

Both buckle types use the same patented J-Hook attachment — reduces belt twisting and attaches securely to virtually any wheelchair frame, including scooters.

🛤️

A-Track Fittings on All 4 Straps

All four straps mount directly into A-Track floor rails — no adapter hardware required. Compatible with standard A-Track systems found in older-generation mobility vans and transit vehicles.

♿

Universal Wheelchair Design

Accommodates virtually all manual wheelchair designs, including scooters and non-standard frames — providing coverage for mixed passenger populations.

💥

30mph / 20G Crash Tested

M-Series straps meet the 30mph/20G crash test standard — delivering the structural performance required for transit wheelchair securement.

💰

Cost-Effective M-Series Platform

Q'Straint's M-Series is engineered for minimum-specification compliance and cost-conscious fleet budgets — professional-grade securement at a fraction of the cost of retractor systems.

M-208-A30 vs. M-201-A30 — Which A-Track Kit?

Feature	M-208-A30 — $172.50 ← You Are Here	M-201-A30 — $172.50
Straps Included	2 over-center + 2 cam buckle	4 over-center buckle straps
Buckle Type	Mixed (cam front / over-center rear)	Uniform (all over-center)
Best For	Front/rear differentiation by buckle type	Simplified single-type operator training
Price	$172.50	$172.50

What's Included

Qty	Component	Description
2	MA-110/111-C	M-Series Manual Wheelchair Tie-Down with Over-Center Buckle, J-Hook & A-Track End Fitting
2	MA-210/11-C	M-Series Manual Wheelchair Tie-Down with Cam Buckle, J-Hook & A-Track End Fitting
⚠ Occupant restraint (lap and shoulder belt) required to complete a full WTORS — sold separately. This kit provides wheelchair tie-downs only.

Vehicle Applications

School Bus Minivan / WAV Community Transport Paratransit NEMT Van

Standards & Compliance

Standard	Description
FMVSS 209 / 210 / 302	Federal Motor Vehicle Safety Standards — Seat Belt Assemblies, Anchorages & Flammability
FMVSS 222	School Bus Passenger Seating & Crash Protection
ADA	Americans with Disabilities Act — for use in ADA-compliant accessible transportation
SAE J2249 / ISO 10542*	Wheelchair Tie-Down and Occupant Restraint Standards — *Not all M-Series configurations meet this standard. Contact us to confirm compliance for your specific application.

For state-by-state compliance requirements and fleet documentation resources, visit our Compliance Resource Center.

Warranty

2-Year Limited Warranty (M-Series)

The M-208-A30 is covered by Q'Straint's 2-year limited warranty as part of the M-Series product line. Registration is required for full warranty coverage. Visit wheelchairstrap.com/pages/warranty-information for full terms and registration details.

Specifications

SKU / Part Number	M-208-A30
Series	M-Series Manual Securement
Kit Contents	2x MA-110/111-C (over-center) + 2x MA-210/11-C (cam buckle)
Buckle Types	Over-Center (2 straps) + Cam Buckle (2 straps)
Hook Type	J-Hook (all 4 straps)
Floor Anchorage	A-Track fitting (all 4 straps)
Crash Testing	30mph / 20G
Chair Compatibility	Virtually all wheelchair designs, including scooters
Lead Time	3 business days (A-Track product)
Warranty	2-Year Limited (registration required)
Price	$172.50 — Free Shipping

⚠ California Prop 65 Warning: This product can expose you to chemicals including lead and/or other substances known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Frequently Asked Questions

▸ Why does this kit include two different buckle types?

The M-208-A30 is designed to provide a practical front/rear split: the over-center buckle straps (MA-110/111-C) are typically used at the rear tie-down positions, where their positive mechanical locking action under load is preferred. The cam buckle straps (MA-210/11-C) are used at the front positions, where their fast pull-to-tension and quick-release action speeds up boarding and alighting. If you prefer a uniform strap type at all four positions, see the M-201-A30 (4 over-center, same price).

▸ Can I buy individual replacement straps from this kit?

Yes. The cam buckle straps in this kit are available individually as the MA-210/11-C ($55.00 each). Call us at 800.884.6456 for pricing on individual MA-110/111-C over-center straps.

▸ What lap belt and shoulder belt work with this kit?

A complete Wheelchair Tie-Down and Occupant Restraint System (WTORS) requires a separate occupant restraint — a lap belt and shoulder belt for the passenger. We carry A-Track-compatible occupant restraint options; call our specialists at 800.884.6456 or visit the Occupant Restraints collection to find the correct configuration for your vehicle.