What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Walker Adjustable Cup Drink Holder SNAPIT! | A001

Vendor: Snapit!
Regular price: $28.00
Sale price: $28.00
Unit price: per

Shipping calculated at checkout.

The SnapIt! Walker Adjustable Cup Drink Holder SNAPIT! (SKU: A001-UNI) is a purpose-built drink holder for walkers and manual wheelchairs. Adjustable to fit a wide range of cup and bottle sizes, it keeps beverages stable and within reach throughout your day.

WheelchairStrap.com — SnapIt! Products

Walker Adjustable Cup Drink Holder SNAPIT! | A001

🚚 Free Shipping on Orders Over $100🏭 Made in Texas, USA🔓 SKU: A001-UNI

$28.00

Key Features

📏

Drink holder fits and used on walkers and wheelchairs

🔧

Includes MultiMount Bracket with UniClamp

🔧

Attaches to tubes from 7/8″ to 1 1/4″ diameter

📏

Opens to hold drink containers up to 3.625″ in diameter, closes to hold standard water bottles and canned drinks

🔧

Includes MultiMount Bracket with UniClamp that attaches to tubes from 7/8″ to 1 1/4″ diameter

🔄

Drink holder snaps into MultiMount bracket and can be easily removed for storage

⚙

Made from marine grade HDPE

🇺🇸

Assembled with stainless steel hardware (Screwdriver Needed for Attaching)

🇺🇸

Made in Texas, USA!

What's Included

Item	Detail
1x Drink Holder	SKU: A001-UNI
Bracket or clamp	Included or device-specific — see product details

Compatible Devices & Applications

Manual wheelchairs and walkers
Water bottles, travel mugs, and cups
Standard beverage containers

Specifications

Spec	Value
SKU	A001-UNI
Price	$28.00
Size	Standard
Adjustment	Yes
Mount	SnapIt! compatible
Color	black

Frequently Asked Questions

What cup sizes does this holder accommodate?

This holder is designed for standard beverage containers including water bottles, travel mugs, and disposable cups. Check the product specifications for the exact diameter range.

Will the cup holder stay secure while I am moving?

Yes. The SnapIt! system uses a precision snap-lock mechanism that keeps both the holder and beverage container firmly in place during normal mobility device operation.

Can I use this holder without a bracket?

This holder requires a SnapIt! mounting bracket, which may be included or sold separately depending on the product. Brackets are device-specific, so select the one matching your wheelchair, scooter, or walker.

Is this holder easy to clean?

The holder can be wiped clean with a damp cloth. Hand washing is recommended for deeper cleaning to preserve the snap mechanism and finish.

Related Products

Wheelchair Mounting Brackets MultiMount Bracket Combo Drink and Phone Holder Cane Holster

Questions? We're Here to Help.

Serving wheelchair and mobility aid users nationwide from Carrollton, TX.

Back to All Products

Adjust text colors

Adjust heading colors

Adjust background colors