What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Walker/Wheelchair Small Smart Phone Holder SnapIt! | W009

Vendor: SnapIt!
Regular price: $25.00
Sale price: $25.00
Unit price: per

Shipping calculated at checkout.

Quantity

Quantity must be 1 or more

The SnapIt! Walker/Wheelchair Small Smart Phone Holder SnapIt! (SKU: W009-U) gives you a safe, stable place to mount your smartphone on your walker or wheelchair. Stay connected, use GPS navigation, and keep your device accessible without holding it.

WheelchairStrap.com — SnapIt! Products

Walker/Wheelchair Small Smart Phone Holder SnapIt! | W009

🚚 Free Shipping on Orders Over $100🏭 Made in Texas, USA🔓 SKU: W009-U

$25.00

Key Features

🔒

Holds flip phones and also smartphones smaller than 3″ wide by .65″ thick.

🔧

Includes MultiMount Bracket with UniClamp that attaches to tubes from 7/8″ to 1 1/4″ diameter or, for the best fit, select the correct diameter from the pull-down menu.

🔧

Includes MultiMount Bracket with UniClamp that attaches to tubes from 7/8″ to 1 1/4″ diameter or, for the best fit, select the correct diameter from the pull-down menu.

✅

Questions about measuring?

🔧

To view installation instructions

⚙

UV Stabilized HDPE (High-Density Polyethylene)

⚙

Stainless Steel Hardware

🔧

Mounting arm included

🇺🇸

Manufactured and Assembled in Texas, USA

What's Included

Item	Detail
1x Phone Holder	SKU: W009-U
Mounting bracket or clamp	See product details

Compatible Devices & Applications

Manual wheelchairs and walkers
Smartphones and cell phones
GPS navigation devices

Specifications

Spec	Value
SKU	W009-U
Price	$25.00
Phone Size	Standard to XL
Mount	SnapIt! compatible
Color	black

Frequently Asked Questions

What phone sizes fit this holder?

Check the product specifications for the exact width range. Most SnapIt! phone holders accommodate smartphones from small to XL. Measure your phone with its case on before ordering.

Is my phone secure while I am moving?

Yes. The holder uses a secure grip to keep your device in place during normal movement. Mount your phone within easy reach without obstructing your view or controls.

Can I use a phone holder with a drink holder at the same time?

Our combo holders combine both functions in one unit. If you have a standalone phone holder, you can add a separate drink holder using an additional SnapIt! bracket.

Will the holder damage my phone?

SnapIt! holders are designed with smooth contact surfaces that will not scratch or damage your device.

Related Products

Combo Drink and Phone Holder Walker Adjustable Drink Holder Mounting Brackets

Questions? We're Here to Help.

Serving wheelchair and mobility aid users nationwide from Carrollton, TX.

Back to All Products

Adjust text colors

Adjust heading colors

Adjust background colors