What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Snap In 3/4" Diameter Extended Reacher Holster | W008

Vendor: SnapIt!
Regular price: $18.00
Sale price: $18.00
Unit price: per

Shipping calculated at checkout.

The SnapIt! Snap-In Extended Reacher Holster (SKU: W008) provides a secure, accessible storage spot for your 3/4" diameter grabber tool on any SnapIt!-equipped device. Your reacher is always right where you need it.

WheelchairStrap.com — SnapIt! Products

Snap In 3/4" Diameter Extended Reacher Holster | W008

🚚 Free Shipping on Orders Over $100🏭 Made in Texas, USA🔓 SKU: W008

$18.00

Key Features

✋

HANDS-FREE WALKING! The perfect item to free hands to ensure your safety.

🔄

Snap-In Extended Reacher Holster for round ¾” diameter Reachers. Reacher snaps snugly into narrow profile holder. Lightweight and narrow profile makes it perfect for walkers and wheelchairs.

⚙

Reacher will not rattle and is readily accessible when needed. Comes with mounting hardware for attachment to 3/4", 7/8”, 1” and 1 1/8” round tubing commonly found on wheelchairs and walkers. Clips on holster are reversible for right or left-hand applications.

🔧

Installation Instructions

⚙

UV Stabilized HDPE (High Density Polyethylene)

⚙

Stainless Steel Hardware

🇺🇸

Manufactured and Assembled in Texas, USA

What's Included

Item	Detail
1x Reacher Holster	SKU: W008

Compatible Devices & Applications

Manual wheelchairs
Power wheelchairs
Scooters
Walkers with SnapIt! bracket
3/4" extended reachers and grabbers

Specifications

Spec	Value
SKU	W008
Price	$18.00
Diameter	3/4"
Mount	Snap-in or slip-in
Material	nylon; metal

Frequently Asked Questions

Is this bracket compatible with my specific device?

Each bracket is designed and tested for a specific mobility device model. Check the product title to confirm compatibility. If you are unsure, contact us at wheelchairstrap.com and we will help you find the right fit.

What tools do I need for installation?

Most brackets require only an Allen wrench or small screwdriver, and in many cases use pre-existing screw holes so no drilling is needed. Full installation instructions are included with your bracket.

Can I move my cup or phone holder between devices?

Yes. Once you have a bracket installed on each device, your SnapIt! holder snaps in and out instantly. Purchase one bracket per device and use a single holder across all of them.

What if the bracket does not fit?

We stand behind our products. If a bracket does not fit as described, contact us and we will make it right. See our return policy at wheelchairstrap.com for full details.

Related Products

Snap-In Cane Holster Walker Adjustable Drink Holder MultiMount Bracket

Questions? We're Here to Help.

Serving wheelchair and mobility aid users nationwide from Carrollton, TX.

Back to All Products

Adjust text colors

Adjust heading colors

Adjust background colors