What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Q'Straint | Q - 8200 - AP - L3 - Piece Wheelchair Restraint Kit - WheelchairStrap.com

Q'Straint 3-Piece Wheelchair Restraint Kit | Q-8200-AP-L

Vendor: Q'Straint
Regular price: $578.00
Sale price: $578.00
Unit price: per

Shipping calculated at checkout.

The Q’Straint Q-8200-AP-L is a complete 3-piece wheelchair securement and occupant restraint kit for L-Track-equipped transit vehicles. Includes four QRT Standard retractors with L-Track fittings, a standard QRT lap belt, and a standard QRT shoulder belt with pin connector — delivering full 4-point wheelchair tie-down plus pelvic and shoulder occupant restraint in one purchase. Meets ANSI/RESNA WC18, ISO 10542, SAE J2249, FMVSS 209/210/302, and CSA Z605.

SKU: Q-8200-AP-L | VENDOR: Q’STRAINT

Q’Straint 3-Piece Wheelchair Restraint Kit — L-Track | 4-Point Securement + Lap & Shoulder Occupant Restraint

✔ Free Shipping 📦 Complete 3-Piece Kit 🏷 Q’Straint ✅ ANSI/RESNA WC18

Key Features

🔒

Complete 4-Point + PSOR System

Four-point wheelchair tie-down plus pelvic and shoulder occupant restraint — full transit compliance in one kit.

🔧

L-Track (PLI) Compatible

Retractors arrive pre-fitted with L-Track fittings — slides directly into the most common transit floor anchorage system.

⚙

Semi-Automatic Tensioning

Single tensioning knob per retractor with automatic self-locking — no secondary lock step; one-person operation.

☑

Crash Tested & WC18 Certified

Meets ANSI/RESNA WC18, ISO 10542, SAE J2249, and FMVSS 209/210 dynamic crash safety standards.

🦯

Pin Connector Shoulder Belt

Female end attaches to the QRT lap belt stud; male pin connects to Q’Straint shoulder belt adapters — secure and tool-free.

🚘

Fleet-Grade Durability

Heavy-duty polyester webbing resists UV exposure and chemical contact for demanding daily fleet service.

What’s Included

Qty	SKU	Component
1	Q-8201-L	4 QRT Standard Retractors with L-Track Fittings Semi-automatic, single tensioning knob, auto-locking; L-Track (PLI) fittings pre-installed; 4 retractors per set
1	Q8-6325	Standard QRT Lap Belt Pelvic/occupant restraint; pairs with Q5-6410-BLK-P shoulder belt via stud connector; meets SAE J2249, ISO 10542, FMVSS 209/210/302
1	Q5-6410-BLK-P	Standard QRT Shoulder Belt with Pin Connector — Black Shoulder occupant restraint; female end attaches to QRT lap belt stud; male pin connector compatible with Q’Straint shoulder belt adapters; black webbing

⚠ L-Track floor anchorage hardware is not included. Requires existing L-Track installation. See our L-Track Floor Anchorage collection if needed.

Full Feature Details

This kit packages all three components required for a complete wheelchair securement and occupant restraint position: four QRT Standard retractors (Q-8201-L) with pre-installed L-Track fittings, a standard QRT lap belt (Q8-6325) for pelvic restraint, and a standard QRT shoulder belt with pin connector (Q5-6410-BLK-P) for upper-body restraint. Together they form a fully compliant 4-point + PSOR wheelchair securement position for L-Track-equipped transit vehicles.

Feature	Description
4-Point Wheelchair Securement	Four retractors anchor the wheelchair frame at four tiedown points (front-left, front-right, rear-left, rear-right) to the L-Track floor system
Semi-Automatic Self-Tensioning	Single tensioning knob per retractor; automatic self-locking once tensioned — no secondary lock step required for secure one-person operation
L-Track (PLI) Fittings	L-Track fittings pre-installed on all four retractors — slides directly into L-Track floor anchorage, the most widely used transit floor securement system
Pelvic Occupant Restraint	QRT Lap Belt (Q8-6325) provides pelvic restraint for the wheelchair occupant; compatible with Q'Straint QRT retractor systems; meets SAE J2249, ISO 10542, FMVSS 209/210/302
Shoulder Occupant Restraint	QRT Shoulder Belt (Q5-6410-BLK-P) provides upper-body restraint; black webbing; female end attaches to QRT lap belt stud; meets FMVSS 209/210, SAE J2249
Pin Connector Design	Male pin end on shoulder belt is compatible with Q’Straint shoulder belt adapters — clean, tool-free connection at every boarding cycle
Professional Installation Required	Improper installation may void warranty and compromise occupant safety; installation must be performed by a qualified technician per Q’Straint installation guidelines

Vehicle Applications

🚖 School Bus 🚕 Transit / City Bus 🚕 Coach Bus 🚆 Rail / Community Transit 🚑 Non-Emergency Medical Transport (NEMT) 🚐 Wheelchair-Accessible Van (WAV) 🚗 Personal Vehicle / Minivan

Standards & Compliance

ANSI/RESNA WC18Wheelchair Tiedowns & Occupant Restraint Systems — dynamic crash safety

ISO 10542Wheelchairs — Tie-Down & Occupant Restraint Systems for Motor Vehicles

SAE J2249Wheelchair Tie-Down Systems for Motor Vehicles

FMVSS 209Seat Belt Assemblies

FMVSS 210Seat Belt Assembly Anchorages

FMVSS 302Flammability of Interior Materials

CSA Z605Wheelchair Securement in Motor Vehicles (Canada)

ℹ️ ADA Compliance Note: This system is designed for use in ADA-accessible transportation. Verify that installation meets applicable ADA requirements for your specific vehicle type and use case.

🛡️ This product meets ANSI/RESNA WC18. For contract documentation, fleet bid specifications, and compliance verification, visit our Compliance Resource Center.

🛡 Warranty: QRT Standard Retractors (Q-8201-L) — 2-year limited | QRT Lap Belt & Shoulder Belt — 1-year limited. Registration required at qstraint.com for full coverage; unregistered products default to 1-year on all components. Verify full warranty terms at amfbrunsamerica.com.

⚠ Register all components immediately after installation to ensure full warranty coverage.

📄 Installation & User Guide: View Q’Straint Installation & User Guide List

⚠️ California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit qstraint.com/prop-65.

Specifications

Specification	Detail
Brand	Q’Straint
Kit SKU	Q-8200-AP-L
System Type	4-Point Wheelchair Securement + Pelvic & Shoulder Occupant Restraint (PSOR)
Floor Fitting Type	L-Track (PLI) — pre-installed on retractors
Retractor Operation	Semi-automatic; single tensioning knob; automatic self-locking
Shoulder Belt Connector	Pin connector (male/female); female attaches to QRT lap belt stud
Belt Color	Black (shoulder belt)
Track / Floor Hardware	Not included — requires existing L-Track floor installation
Price	$578.00
Shipping	Free Shipping
Warranty — Retractors	2-year limited (QRT Standard series) — registration required
Warranty — Belts	1-year limited — registration required
Installation	Professional installation required — improper installation may void warranty and compromise safety

Frequently Asked Questions

Is L-Track floor anchorage included in this kit? +

No. The retractors include L-Track fittings that slide into existing L-Track floor hardware, but the floor track itself is sold separately. If your vehicle does not have L-Track installed, see our L-Track Floor Anchorage collection for the required floor hardware.

Does this kit provide both wheelchair securement and occupant restraint? +

Yes. This is a full PSOR kit. The four QRT Standard retractors (Q-8201-L) secure the wheelchair at four tiedown points. The QRT Lap Belt (Q8-6325) provides pelvic occupant restraint, and the QRT Shoulder Belt (Q5-6410-BLK-P) provides upper-body shoulder restraint — together forming a complete securement position meeting ADA and transit compliance requirements.

What vehicles is this kit compatible with? +

Any vehicle with L-Track (PLI) floor anchorage — including paratransit vans, school buses, transit/city buses, WAVs, NEMT vehicles, rail cars, and coaches. If you are unsure about your floor system or need help with kit selection, contact us at 800.884.6456.

What is the warranty and how do I register? +

The QRT Standard retractors (Q-8201-L) carry a 2-year limited warranty. The lap belt (Q8-6325) and shoulder belt (Q5-6410-BLK-P) each carry a 1-year limited warranty. All components require product registration at qstraint.com for full warranty coverage. Unregistered products default to 1-year on all components.