Combination Lap & Shoulder Belt with Manual Height Adjuster, Pin Connectors on Bottom, and L-Track at Top Combination Lap & Shoulder Belt with Manual Height Adjuster and Pin Connector. Triangle fitting attaches to stud on the lap belt. Lap belt connects to rear tie-downs.
SKU: Q8-6325-AT | VENDOR: Q'STRAINT
Q'Straint Lap & Shoulder Belt Pin Connectors at Bottom & L-Track at Top | Q8-6325-AT
✔ Free Shipping 🪢 Complete Occupant Restraint 🏷 Q'Straint
Standards & Compliance
SAE J2249Wheelchair Tie-Down Systems for Motor Vehicles
ISO 10542Wheelchairs — Tie-Down & Occupant Restraint Systems
FMVSS 209Seat Belt Assemblies
FMVSS 210Seat Belt Assembly Anchorages
FMVSS 302Flammability of Interior Materials
CSA Z605Wheelchair Securement in Motor Vehicles (Canada)
ℹ️ ADA Compliance Note: This product is designed for use in ADA-accessible transportation applications. Verify that installation meets applicable ADA requirements for your specific vehicle type and use.
Frequently Asked Questions
Is this belt designed specifically for wheelchair occupants? +
Yes. Wheelchair occupant restraints are purpose-built for wheelchair transport and are different from standard vehicle seatbelts. They are designed to account for the wheelchair seating position and attach to the vehicle floor track or rear tie-down points rather than a fixed vehicle seat.
Will this belt fit the occupant comfortably and safely? +
The same fit principles apply as any seatbelt: the lap portion should sit low across the pelvis — not the belly — and the shoulder portion should cross the center of the chest without cutting into the neck. If the belt rides up or doesn't fit correctly, check seating posture, belt length, and whether a positioning guide is needed.
Is this belt compatible with my existing securement system? +
It is recommended that all components — retractors, occupant belt, and floor anchorage — be from the same manufacturer. Contact us with your current system details and we will confirm compatibility before you order.
What are best practices for positioning lap and shoulder belts on riders? +
Lap belt: low on hips and pelvis, never across the stomach. Shoulder belt: mid-chest, over the shoulder bone, not the neck or under the arm. Both should be snug, flat, and untwisted. These same principles apply regardless of wheelchair or vehicle type.
Does this belt attach to the wheelchair or the vehicle? +
The lap belt attaches to the vehicle floor track or rear tie-down points — not to the wheelchair. The shoulder belt attaches to the vehicle sidewall or a dedicated shoulder belt mount. Check the product description for your specific model's mounting details.
What is the warranty? +
See the Warranty section above. Registration at
qstraint.com is required for full warranty coverage.
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish