What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Sure-Lok L-Track Fitting for Retractors | AL701061

Vendor: Sure-Lok
Regular price: $44.00
Sale price: $44.00
Unit price: per

Shipping calculated at checkout.

What Is It?
The Sure-Lok AL701061 is a heavy-duty L-Track fitting that converts Sure-Lok AL700 and FF600 Series wheelchair tie-down retractors from standard floor-mount installation to L-track installation — without replacing the retractor itself. If your vehicle uses L-track anchorage and you already own Sure-Lok AL700 or FF600 Series retractors, this fitting bridges the two systems with a secure, purpose-engineered connection. It is precision-designed to work exclusively with Sure-Lok FF600 and AL700 Series retractors and will not fit other brands or retractor series.

Sure-Lok L-Track Fitting for Retractors — AL701061

Converts your existing Sure-Lok AL700 or FF600 Series retractors to L-track mounting. Everything you need is included — no extra hardware required.

SKU: AL701061 Brand: Sure-Lok In Stock Free Shipping on Orders Over $100 Compatible: AL700 & FF600 Series Only

Key Features

🔄 Instant Series Conversion

Upgrades Sure-Lok AL700 and FF600 Series retractors to L-track mounting in minutes — no new retractor purchase required.

🔩 Heavy-Duty Construction

Built to Sure-Lok's exacting standards. High-strength hardware resists vibration, corrosion, and the demands of daily transport.

🎯 Exact-Fit Design

Precision-engineered specifically for Sure-Lok FF600 and AL700 Series retractors — guaranteed compatibility, zero guesswork.

📦 Hardware Included

Ships complete with bolt, nylon washers, and metal washers. Ready to install right out of the box.

🚐 Fleet-Ready

Ideal for NEMT, paratransit, and school bus operators standardizing vehicles on L-track systems while retaining existing Sure-Lok retractors.

💰 Cost-Effective Upgrade

Avoid the cost of replacing entire retractor systems. One fitting is all it takes to adapt a Sure-Lok retractor to your L-track floor.

What's Included

Item	Qty	Notes
L-Track Fitting	1	Interfaces with standard L-track (Series L) floor anchorage
Bolt	1	High-strength securing bolt
Nylon Washer	2	Provides vibration damping and surface protection
Metal Washer	2	Distributes load and ensures a secure clamp

Vehicle Applications

NEMT Vans & Minivans Paratransit Buses School Buses Transit Coaches Accessible Shuttle Vans Personal Vehicles with L-Track

Compatibility Note: This fitting is designed exclusively for use with Sure-Lok AL700 Series and FF600 Series wheelchair tie-down retractors. It will not fit other Sure-Lok series or retractors from other manufacturers. Verify your retractor model before ordering.

Standards & Compliance

Standard	Relevance
SAE AS2496 / Series L Track	This fitting is designed to interface with Series L (L-track) anchorage systems, which conform to the SAE AS2496 L-track fitting specification used widely in accessible transportation.
ADA / FMVSS Compatibility	Intended for use with Sure-Lok AL700 and FF600 Series retractors, which are designed for compliant wheelchair securement in ADA-accessible and FMVSS-regulated vehicles. Compliance of the overall securement system depends on proper installation and use of all components together.

For state-by-state compliance requirements and fleet documentation resources, visit our Compliance Resource Center.

Product Specifications

SKU / Part Number	AL701061
Brand	Sure-Lok
Compatible Retractor Series	Sure-Lok AL700 Series & FF600 Series only
Mounting Type	L-Track (Series L) Floor Anchorage
Hardware Included	Bolt, 2x Nylon Washer, 2x Metal Washer
Price	$44.00
Shipping	Free Shipping on Orders Over $100

Sure-Lok Warranty: The AL701061 is covered by Sure-Lok's 1-Year Limited Warranty against factory defects in materials and workmanship. The warranty period runs from the date of shipment from Sure-Lok. For warranty claims, contact WheelchairStrap.com at 800.884.6456 or view full warranty details.

Frequently Asked Questions

Will this fitting work with my Sure-Lok retractor?

The AL701061 is designed to work exclusively with Sure-Lok AL700 Series and FF600 Series wheelchair tie-down retractors. It will not fit other Sure-Lok series or retractors from other brands. Check the model number printed on your retractor before ordering. If you're unsure, call us at 800.884.6456 and our specialists will confirm compatibility.

Does this fitting work with any L-track on the market?

The AL701061 is designed for use with standard Series L (L-track) floor anchorage systems that conform to the SAE AS2496 L-track fitting specification — the most common L-track format used in accessible transit vehicles. If your vehicle uses a proprietary or non-standard track system, verify compatibility before installing.

Do I need any additional hardware to complete the installation?

No. The AL701061 ships complete with everything needed to mount the fitting to your retractor and seat it in the L-track: the L-track fitting, one securing bolt, two nylon washers, and two metal washers. Track hardware is sold separately if you are also installing new L-track in your vehicle.

Can I use this fitting on a school bus or paratransit vehicle?

Yes. This fitting is well suited for NEMT, paratransit, and school bus fleets that are already running L-track anchorage and want to use Sure-Lok AL700 or FF600 Series retractors. Always verify that your overall securement setup — retractors, occupant restraints, and anchorage — meets the applicable federal, state, and local regulations for your vehicle type.