4 QRT-360 Retractors with Slide 'N Click Fittings BUILT TO MEET TOMORROW’S STANDARDS RACTOR TO MEET THESE INCREASED STANDARDS. Vehicle Applications: School Bus, City Bus, Coach Bus, Rail, Community Transport, Minivan, WAV Brouchure: QRT-360 FEATURES FULLY MEETS WC18/19 - Meets load requirements of up to 60% higher during a collision as specified by RESNA & the WC18 standard.
SKU: Q-10009 | VENDOR: Q'STRAINT
Q'Straint 4 QRT-360 Retractors Kit with Slide 'N Click Fittings | Q-10009
✔ Free Shipping🔒 4-Point Tie-Down Kit🏷 Q'Straint
Key Features
⚙️
Self-Tensioning
Automatically takes up slack — no manual tensioning required.
🟢
Positive Lock Indicator (PLI)
Clearly indicates when the fitting is locked into the anchorage. Eliminates guesswork for operators.
👟
Foot Release Lever
Hands-free release — operator can disengage the retractor with a foot lever without bending down.
🔗
J-Hook Design
Reduces belt twisting and ensures proper securement angle — accommodates virtually all wheelchair designs.
📐
Low Profile & Compact
No mounting bracket required — retractors fit under most wheelchair footrests.
🛡
Ultra-Durable Construction
Constructed from hardened steel and coated in zinc for maximum corrosion resistance.
↔️
Interchangeable
No designated right, left, front, or rear positions — any retractor works at any of the four securement points.
🏆
RESNA WC18 Rated
Built to the higher load requirements of the WC18 standard.
⚠ Also required — not included: Occupant lap & shoulder belt
Full Feature Details
STRONGER THAN ALL OTHER RETRACTORS
Feature
Description
Brouchure:
QRT-360
FULLY MEETS WC18/19
Meets load requirements of up to 60% higher during a collision as specified by RESNA & the WC18 standard. The QRT-360 is also fully compatible with newer WC19 Wheelchairs.
STRONGER THAN ALL OTHER RETRACTORS
The QRT-360 utilizes an innovative energy management design and new energy-absorbing steel frame to deliver the system’s full strength for maximum load capacity.
NEW WEBBING & TEETH
QRT-360 is the only retractor to feature both high-strength 58mm webbing and 25 interlocking teeth, that combine to allow for super fine adjust self-tensioning.
AUTOMATIC SELF-TENSIONING & LOCKING
Our industry-leading self-tensioning retractors automatically take up slack to ensure wheelchair passenger is always secured. The belts continue to tighten during low-g vehicle movements, reducing the potential for dangerous excursions in the event of a collision.
ACCOMMODATES LARGER WHEELCHAIRS
QRT-360 features a smaller retractor footprint than traditional securement, allowing for better placement flexibility and accommodation of large wheelchairs and scooters.
POSITIVE LOCK INDICATOR FOR L-TRACK
For L-Track and L-Pocket applications, the QRT-360 boasts a re-engineered PLI for an even clearer, more precise indication that the fitting is locked in the anchorage.
J-HOOKS
J-Hook attachments make it easy to secure virtually any device, and reduces the twisting of belts.
ENLARGED FOOT RELEASE
The foot release of the QRT-360 has been enlarged, making it easier to engage.
SNC ASSEMBLY FOR SLIDE ‘N CLICK
For Slide ‘N Click anchorages, the QRT-360 can use our patented SNC 360º assembly that eliminates alignment guesswork.
ULTRA-DURABLE
Constructed from hardened steel and coated in zinc for maximum corrosion resistance.
LOW PROFILE
No mounting bracket allows QRT-360 retractors to fit under most footrests.
INTERCHANGEABLE
Eliminates confusion: no right, left, front or rear locations.
Vehicle Applications
🚐 Wheelchair-Accessible Van (WAV)🚌 Paratransit / Minibus🚑 Non-Emergency Medical Transport (NEMT)🚌 School Bus🚐 Sprinter / Transit Van🚆 Rail / Community Transit
Standards & Compliance
ISO 10542Wheelchairs — Tie-Down & Occupant Restraint Systems
RESNA WC18Wheelchair Tie-Down & Restraint Systems — Heavy Duty (ANSI/RESNA)
FMVSS 222School Bus Passenger Seating & Crash Protection
FMVSS 209Seat Belt Assemblies
FMVSS 210Seat Belt Assembly Anchorages
FMVSS 302Flammability of Interior Materials
CSA Z605Wheelchair Securement in Motor Vehicles (Canada)
ℹ️ ADA Compliance Note: This product is designed for use in ADA-accessible transportation applications. Verify that installation meets applicable ADA requirements for your specific vehicle type and use.
🛡 Warranty: 5-year limited. * Registration required at qstraint.com for full coverage. Without registration, 1-year limited applies.
⚠ Warranty terms should be verified directly with the manufacturer.
⚠ California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See qstraint.com/prop-65
Does this kit include everything I need for one wheelchair position? +
A complete wheelchair tie-down and occupant restraint system — often called a 4-point securement system — has three primary components: floor anchorages (L-Track rail and floor pockets), wheelchair securement retractors (4-point tie-downs), and an occupant restraint (lap and shoulder belt). See the What's Included section for exactly what this kit contains and what may need to be purchased separately.
Do I need to buy floor anchors separately? +
Check the What's Included section. If L-Track rail or floor pockets are not listed, they need to be purchased separately. Your vehicle may already have floor anchorage installed — check before ordering.
Is professional installation required? +
The retractors connect to existing floor anchorage and require no special tools for daily use. Floor anchorage components must be installed by a qualified WAV modifier.
Can I mix brands within the same vehicle? +
We do not recommend mixing brands within the same 4-point wheelchair position. All four retractors at each position should be the same brand and series for system-level compatibility and compliance.
Do I need to register this product for the full warranty? +
Registration at qstraint.com is required for full warranty coverage.
What vehicle types is this kit designed for? +
See the Vehicle Applications section. Contact us to confirm suitability for your specific vehicle make and model.
Specifications
Specification
Detail
Brand
Q'Straint
SKU
Q-10009
Price
$1026.00 — price shown is per kit
Shipping
Free Shipping
Warranty
5-year limited
Use / Installation
Retractors require no special installation for daily use. Floor anchorage components require professional installation by a qualified WAV modifier.
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish