Q'Straint Q5-6410-PA1 — Manual Lap & Shoulder Belt Kit with Shoulder Belt Adapter. A complete 3-component occupant restraint kit for wheelchair passengers in vehicles that have existing OEM seat belts or other anchor hardware already in place. The included shoulder belt adapter (S5-6410-S) mounts to any existing anchored point — without disturbing the vehicle's factory belt system — and the shoulder belt with pin connectors links directly to QRT retractor anchor studs behind the wheelchair.
✓ FREE SHIPPING Q'STRAINT SKU: Q5-6410-PA1 3-Piece Kit 1-Year Warranty
Manual Lap & Shoulder Belt Kit
with Shoulder Belt Adapter | Q5-6410-PA1
The Q5-6410-PA1 solves one of the most common occupant restraint installation challenges: adding a compliant shoulder belt anchor to a vehicle that doesn't have one pre-installed for the wheelchair seating position. The S5-6410-S adapter provides a new shoulder belt anchor point without removing or modifying existing vehicle belts. The Q5-6410-BLK-P shoulder belt connects to the adapter at the top and to the QRT retractor anchor stud at the bottom — a clean, integrated installation for vans and minivans already equipped with QRT retractors.
Key Features
🔧
Shoulder Belt Adapter — No Modifications
The S5-6410-S adapter creates a new shoulder belt anchor point without removing or altering the vehicle's existing belt system. Mounts to any suitable existing anchored point — preserving OEM hardware while adding the required restraint position for wheelchair passengers.
🔀
Pin Connector Shoulder Belt
The Q5-6410-BLK-P shoulder belt features male and female pin connectors — connecting to the adapter at the top and to the pin on QRT retractor anchor hardware at the bottom. This integrates the shoulder belt directly into the existing QRT wheelchair securement system.
3️⃣
Complete 3-Piece Kit
All three components included in one kit — lap belt (Q8-6325), shoulder belt with pin connectors (Q5-6410-BLK-P), and shoulder belt adapter (S5-6410-S). Everything needed for a complete occupant restraint installation.
🪑
QRT Retractor Integration
Designed specifically for use with Q'Straint QRT retractor systems. The lap belt connects to the pin connectors on the QRT wheelchair securements mounted behind the wheelchair — making this kit the correct occupant restraint choice for QRT-equipped vehicles.
⚙️
Adjustable Fit
Both the lap belt and shoulder belt include webbing adjusters for operator customization — accommodating wheelchair passengers of different sizes and seating positions without additional hardware.
🚐
Minivan & WAV Ready
Particularly well-suited for wheelchair-accessible vans and minivans where the wheelchair seating position does not have a factory shoulder belt anchor. The adapter solution is far less invasive than drilling new anchor points.
How the Q5-6410-PA1 Connects
| Connection Point |
Detail |
| Shoulder Belt — Top |
Connects to the S5-6410-S shoulder belt adapter mounted at the upper anchor point (existing vehicle hardware) |
| Shoulder Belt — Bottom |
Connects via pin connector to the stud on the QRT wheelchair securement lap belt or retractor anchor behind the wheelchair |
| Lap Belt |
Connects to pin connectors on the QRT wheelchair securements positioned behind the wheelchair — integrating lap belt into the retractor anchor system |
What's Included
| Qty |
SKU |
Description |
| 1 |
Q8-6325 |
Q'Straint Standard QRT Lap Belt — adjustable, connects to QRT retractor anchor studs |
| 1 |
Q5-6410-BLK-P |
Q'Straint Shoulder Belt with Male & Female Pin Connector (black) — connects adapter to retractor stud |
| 1 |
S5-6410-S |
Q'Straint Shoulder Belt Female End Adapter — mounts to existing vehicle anchor point; no modification to OEM belts required |
| ⚠ This kit provides occupant restraint only. A complete WTORS requires 4 wheelchair tie-down straps in addition to these occupant restraint components. See related products below. |
Vehicle Applications
Minivan / WAV Personal Vehicle Paratransit NEMT Van Community Transport
Standards & Compliance
| Standard |
Description |
| FMVSS 209 |
Federal Motor Vehicle Safety Standard — Seat Belt Assemblies |
| FMVSS 210 |
Federal Motor Vehicle Safety Standard — Seat Belt Assembly Anchorages |
| FMVSS 302 |
Flammability of Interior Materials |
| ADA |
Americans with Disabilities Act — for use in ADA-compliant accessible transportation |
Warranty
1-Year Limited Warranty
The Q5-6410-PA1 and all included components are covered by Q'Straint's 1-year limited warranty against factory defects in materials and workmanship. Visit wheelchairstrap.com/pages/warranty-information for full terms, or call us at 800.884.6456 for assistance.
Specifications
| SKU / Part Number |
Q5-6410-PA1 |
| Kit Contents |
Q8-6325 Lap Belt + Q5-6410-BLK-P Shoulder Belt w/ Pin Connector + S5-6410-S Shoulder Belt Adapter |
| Lap Belt |
Q8-6325 — adjustable, connects to QRT retractor pin connectors |
| Shoulder Belt |
Q5-6410-BLK-P — black, male & female pin connectors, adjustable |
| Shoulder Belt Adapter |
S5-6410-S — mounts to existing vehicle anchor; individual price $36.00 |
| Retractor Compatibility |
Q'Straint QRT Standard, QRT Deluxe, QRT Max |
| Color |
Black (shoulder belt webbing) |
| Material |
Nylon webbing / metal hardware |
| Warranty |
1-Year Limited |
| Price |
$210.00 — Free Shipping |
⚠ California Prop 65 Warning: This product can expose you to chemicals including lead and/or other substances known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit
www.P65Warnings.ca.gov.
Frequently Asked Questions
▸ What does the shoulder belt adapter (S5-6410-S) actually attach to in the vehicle?
The S5-6410-S shoulder belt adapter mounts to any existing anchored point in the vehicle — this is typically the OEM shoulder belt anchor hardware already present in the van. It does not require removal of the factory belt. The adapter provides the new upper attachment point for the wheelchair occupant shoulder belt while the factory belt remains in place for its original seating position.
▸ How does the lap belt connect to the wheelchair securement system?
The Q8-6325 lap belt connects to pin connectors on the QRT wheelchair securements (retractors or floor anchors) mounted behind the wheelchair. This integrates the occupant lap belt directly into the QRT floor anchor system — creating a mechanically connected lap belt anchor that does not require a separate floor attachment point for the belt.
▸ Does this kit work with all QRT retractors?
Yes — the Q5-6410-PA1 is designed to work with Q'Straint QRT Standard, QRT Deluxe, and QRT Max retractors. The pin connector on the shoulder belt and the lap belt connections are designed around the standard QRT anchor stud system. If you are unsure whether this kit is compatible with your existing retractors, call us at 800.884.6456.
▸ Can I buy the S5-6410-S adapter separately?
Related Products
Not sure which occupant restraint kit fits your vehicle?
Authorized Q'Straint dealer — occupant restraint specialists for WAV, paratransit, and NEMT.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish