What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

Open Face Smart Phone Holder for Walkers & Rollators | W009OF

Vendor: SnapIt!
Regular price: $40.00
Sale price: $40.00
Unit price: per

Shipping calculated at checkout.

Quantity

Quantity must be 1 or more

Open Face Smart Phone Holder
for Walkers & Rollators

SnapIt! W009OF | Walker · Rollator · Wheelchair

Full access to your phone while on the move. The W009OF mounts securely to walker, rollator, or wheelchair tubing and holds your smart phone at an adjustable angle — shock cord retainer included for single-handed attachment and removal. Includes one MultiMount bracket. CNC machined from marine-grade HDPE with stainless steel hardware.

Full Screen Access

Left or Right Side

Marine-Grade

Made in Texas

Key Features

Open-Face Design

Full access to your touchscreen, speakers, camera, and side buttons — no lid to open, nothing blocking the screen. Use navigation, answer calls, or stream audio hands-free.

Shock Cord Retainer

Holds phones 3.1" to 3.7" wide and up to .77" thick securely in place. Single-handed attachment and removal — no buckles, no clips to fumble with.

Adjustable Angle & Side

Tilt the holder to your preferred viewing angle. Top and mounting plates are fully reversible — mount on the right or left side of your walker, rollator, or wheelchair.

SnapIt! MultiMount System

Snaps in and out of the SnapIt! MultiMount bracket. Move the holder between devices or swap in other SnapIt! accessories — drink holders, combo holders — on the same bracket.

UniClamp Mounting

Attaches to horizontal or vertical tubing from 7/8" to 1-1/4" diameter using the included UniClamp. Select your tubing diameter when ordering for the best fit.

Built to Last

CNC machined from marine-grade HDPE — the same corrosion-resistant material used in marine applications. Assembled with stainless steel hardware. Proudly made in Texas, USA.

What's Included

Item	Details
W009OF Open-Face Phone Holder	Fits phones 3.1"–3.7" wide, up to .77" thick
MultiMount Bracket (1 included)	UniClamp — select tubing diameter: 7/8", 1", 1-1/8", or 1-1/4"
Hardware	Stainless steel — pre-assembled

Details

W009OF Open-Face Phone Holder

Fits phones 3.1"–3.7" wide, up to .77" thick

MultiMount Bracket (1 included)

UniClamp — select tubing diameter: 7/8", 1", 1-1/8", or 1-1/4"

Hardware

Stainless steel — pre-assembled

Clamp sizing is tubing-diameter specific. Select the correct diameter for your walker, rollator, or wheelchair frame tubing when ordering. Need a second mounting point? Additional clamps are available for $1.00 each. See the Instruction List for installation guides.

Specifications

W009OF

Phone Width (fits)

3.1" to 3.7"

Phone Thickness (max)

0.77"

Holder Height

5.25" (bottom of cage to top ring)

Mounting

UniClamp — 7/8", 1", 1-1/8", or 1-1/4" tubing diameter

Tubing Orientation

Horizontal or vertical

Left or right (reversible mounting plate)

Material

Marine-grade HDPE / stainless steel hardware

Bracket Included

Yes — one MultiMount bracket

Origin

Made in Texas, USA

Frequently Asked Questions

Will this fit my phone with a case on?

The W009OF fits phones from 3.1" to 3.7" wide and up to .77" thick. Most slim and medium-profile cases will fit within these dimensions. Very thick or bulky protective cases may not. If unsure, measure your phone with the case on before ordering.

How do I know which clamp size to order?

Measure the outer diameter of your walker, rollator, or wheelchair frame tubing where you plan to mount the holder. Common walker tubing is 7/8" to 1". If unsure, the UniClamp option fits 7/8" to 1-1/4" tubing and is the most flexible choice. Visit our Instruction List for a measuring guide, or call us at 800.884.6456.

Can I mount it on the left or right side?

Yes. Both the top plate and the mounting plate are reversible, so the W009OF can be configured for left or right side mounting without any additional hardware.

Can I use the W009OF bracket with other SnapIt! accessories?

Yes — the included MultiMount bracket is compatible with the entire SnapIt! accessory line. You can snap in a drink holder, a combo holder, or any other SnapIt! mobility accessory on the same bracket, making it easy to switch out accessories as your needs change.

Open Face Smart Phone Holder for Walkers & Rollators | W009OF

Open Face Smart Phone Holder
for Walkers & Rollators

Key Features

What's Included

Compatible Devices

Specifications

Frequently Asked Questions

Related Products

Open Face Smart Phone Holder for Walkers & Rollators | W009OF

Open Face Smart Phone Holderfor Walkers & Rollators

Key Features

What's Included

Compatible Devices

Specifications

Frequently Asked Questions

Related Products

Open Face Smart Phone Holder
for Walkers & Rollators