The Q'Straint Ambulok Stretcher Bracket PowerPro (Q04BR201) is a cot-side interface bracket that connects a compatible powered cot to the Ambulok vehicle docking system, completing the link between cot and vehicle in a fully SAE J3027-certified securement assembly. Contact us with your cot make and model to confirm this is the correct bracket for your cot before ordering.
The PowerPro bracket mounts to a compatible cot without any drilling, cutting, or permanent modification. When paired with either Ambulok Docking System (Q10-018 or Q10-021), you have a complete, crash-certified cot securement solution that protects patients, reduces liability exposure, and meets NEMT compliance requirements immediately upon installation.
Engineered specifically for the Stryker Power PRO XT powered cot platform — no guesswork, no adapters, no fabrication required.
Mounts to the Stryker Power PRO XT without drilling, cutting, or any permanent alteration to the cot — protecting your existing cot investment.
When used with the Ambulok Docking System and Patient Restraint, the complete assembly meets the full SAE J3027 crash standard for ambulance-based equipment.
Works with both the Ambulok Mechanical System (Q10-018) and the Ambulok Electrical System (Q10-021) — choose the docking system that fits your operation.
Lightweight (≤10 lbs.) and ergonomically designed for fast, single-handed connection to the vehicle docking system — exactly what NEMT technicians need in the field.
Connects and releases from the vehicle docking system without tools, enabling rapid load/unload and easy transition between cot and wheelchair transport modes.
For Stryker Power PRO XT operators, the Q04BR201 PowerPro Bracket is the only cot-side interface that brings your powered cot into a fully SAE J3027-certified securement system — without replacing the cot, modifying it, or purchasing a proprietary vehicle-integrated solution you can't remove.
The Stryker Power PRO XT is a significant capital investment. This bracket attaches without any permanent modification — no drilling, no cutting — so your cot retains full resale value and manufacturer warranty coverage.
Rather than waiting to replace your cot fleet, the PowerPro Bracket brings your existing Stryker cots into compliance with SAE J3027 immediately — the fastest and most economical path to a compliant NEMT operation.
The Q04BR201 works with both the Ambulok Mechanical System (Q10-018) and the Ambulok Electrical System (Q10-021). If you upgrade your docking system in the future, your bracket investment carries over.
Designed specifically around the Stryker Power PRO XT's geometry and loading behavior, the PowerPro bracket docks and releases in a single fluid motion that aligns with the powered cot's own loading sequence.
This bracket is purpose-built for the Stryker Power PRO XT. If this is the cot in your fleet, this is the bracket that makes the Ambulok system work for you.
Whether you operate cargo vans or rear-entry minivans with OMNI Floor, the PowerPro Bracket gives your Stryker-equipped vehicles a certified, removable cot securement solution.
Operators with non-compliant Stryker-cot fleets can achieve SAE J3027 compliance across the entire fleet by pairing each cot with a PowerPro Bracket and each vehicle with an Ambulok Docking System — no new cots, no new vehicles.
The bracket removes from the cot and the docking system removes from the vehicle — allowing the same vehicle to switch quickly between powered cot transport and wheelchair transport modes.
| Part Number | Q04BR201 |
| Bracket Type | PowerPro (Powered Cot Interface) |
| Compatible Cot | Contact us to confirm cot compatibility before ordering — provide your cot make and model number |
| Docking System Compatibility | Ambulok Q10-018 (Mechanical) & Q10-021 (Electrical) |
| Cot Modification Required | None |
| Weight | ≤10 lbs. |
| Tools Required | None for docking/undocking |
| Docking System Required (Separate) | Yes — Q10-018 or Q10-021 |
| Patient Restraint | Not included — contact us to confirm ordering details |
| System Crash Certification | SAE J3027 — Fully Certified (complete system: Front 30 mph/22.5G | Side 15 mph/26G | Rear 10 mph/11G) |
| Docking System Specs* | L: 9.12" | W: 9.12" | H: 2.62" | Wt: 10 lbs. |
| Release Mechanism Specs* | L: 35" | W: 1.22" | H: 2.62" | Wt: 1.25 lbs. |
| Total Cot Securement Zone* | L: 77" | W: 8.25" | Total Wt: 18.25 lbs. |
| Manufacturer | Q'STRAINT |
| Regional Availability | North America |
| Warranty | 3-Year Limited Warranty |
* Specs shown for reference — these are the dimensions of the Ambulok Docking System (Q10-018 / Q10-021), which is required for a complete system and sold separately.
English
Chinese (Traditional)
Danish
French
German
Italian
Japanese
Russian
Spanish