What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Q04BR074 | Pride Mobility Jazzy QLK Bracket

Vendor: Q'Straint
Regular price: $365.25
Sale price: $365.25
Unit price: per

Shipping calculated at checkout.

The Q04BR074 is a wheelchair-specific docking bracket that allows the Pride Mobility Jazzy Select HD, Select 14, Select 14 XL, Jazzy Jet 2, Jazzy Jet 2 HD to interface with the Q'Straint QLK® Docking System. When the wheelchair rolls into the vehicle, the bracket engages the docking base automatically — securing the wheelchair without the need for manual strap routing over the chair.

QLK® CompatibleWC18 Compliant SystemFree Shipping

Wheelchair Compatibility

Manufacturer	Pride Mobility
Series	Jazzy
Model(s)	Select HD, Select 14, Select 14 XL, Jazzy Jet 2, Jazzy Jet 2 HD
Compatible System	Q'Straint QLK® Docking System
SKU	Q04BR074

What's Included

Qty	Component	SKU
1	Q'Straint QLK® Wheelchair Docking Bracket	Q04BR074

Standards & Compliance

This bracket is a component of the Q'Straint QLK® Docking System, which is certified to meet the following safety standards:

ANSI/RESNA WC18	Wheelchair tiedowns and occupant restraint systems
SAE J2249	Wheelchair tiedowns and occupant restraint systems
ISO 10542	Technical systems and aids for disabled or handicapped persons

For contract documentation and compliance verification, visit our Compliance Resource Center.

📄 View Installation Instructions (PDF)

Frequently Asked Questions

What wheelchair does this bracket fit?

This bracket is designed specifically for the Pride Mobility Jazzy Select HD, Select 14, Select 14 XL, Jazzy Jet 2, Jazzy Jet 2 HD. It is not a universal bracket. Verify your exact wheelchair model before ordering.

What Q'Straint system is required?

This bracket is designed to work with the Q'Straint QLK® Docking System. The docking system base must be installed in the vehicle separately.

Is installation hardware included?

The bracket (Q04BR074) ships as a single unit. Mounting hardware for the docking base is sold separately. Refer to the installation instructions PDF for required tools and hardware.

Can I return this bracket if it doesn't fit?

Contact us before ordering if you are unsure of compatibility. We're happy to verify the correct bracket for your wheelchair model. Phone: (972) 420-0800 | Email: sales@wheelchairstrap.com

Need help confirming the right bracket for your wheelchair?

Our team verifies bracket compatibility before every order.

📞 (972) 420-0800 ✉ sales@wheelchairstrap.com

Back to All Products

Adjust text colors

Adjust heading colors

Adjust background colors