What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

QLK Flexible Dash Control | QS10131

Vendor: Q'Straint
Regular price: $95.00
Sale price: $95.00
Unit price: per

Shipping calculated at checkout.

The QS10131 is the Q'Straint QLK Flexible Dash Control — the slim, low-profile control panel used to operate the QLK Docking System from inside the vehicle. It connects via an 8-pin connector with 6 ft total cable length (1 ft flat web cable for dash routing + 5 ft traditional cable to the unit). Not compatible with the QLK-100. For QLK-150 systems, see QS99007.

SKU: QS10131 | VENDOR: Q'STRAINT

QLK Flexible Dash Control | QS10131

🚚 Free Shipping on Orders Over $100📱 Dash Control🏷 Q'Straint

Key Features

📱

Slim Low-Profile Design

Compact form factor designed to mount cleanly on the dash or console without adding bulk or interfering with driver visibility.

💡

Embedded LED Indicators

Status LEDs built into the control surface show QLK docking system state at a glance.

👆

Large Touch Area

Oversized control surface for easy operation, including for users with limited hand dexterity.

🔌

8-Pin Connector, 6 ft Total Length

Includes 1 ft flat web cable for dash routing and 5 ft traditional cable to the docking unit. Connects via 8-pin connector.

What's Included

Qty	Component	SKU
1	QLK Flexible Dash Control	QS10131

Full Feature Details

Key Feature Summary

Feature	Description
Slim Low-Profile Design	Compact form factor designed to mount cleanly on the dash or console without adding bulk or interfering with driver visibility.
Embedded LED Indicators	Status LEDs built into the control surface show QLK docking system state at a glance.
Large Touch Area	Oversized control surface for easy operation, including for users with limited hand dexterity.
8-Pin Connector, 6 ft Total Length	Includes 1 ft flat web cable for dash routing and 5 ft traditional cable to the docking unit. Connects via 8-pin connector.

Standards & Compliance

ANSI/RESNA WC18Wheelchair Tiedowns & Occupant Restraint Systems

SAE J2249Wheelchair Tie-Down Systems for Motor Vehicles

ISO 10542Wheelchairs — Tie-Down & Occupant Restraint Systems

📘 Compliance & Documentation: Visit our Compliance Resource Center.

🛡 Warranty: 3-year limited. Registration required at qstraint.com for full coverage.

⚠ California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. See qstraint.com/prop-65

Specifications

Specification	Detail
Brand	Q'Straint
SKU	QS10131
Price	95.00 — per unit
Shipping	Free Shipping on Orders Over $100
Warranty	3-year limited
Compatible With	QLK Docking System
NOT Compatible With	QLK-100
Connector	8-pin
Cable Length	6 ft total (1 ft flat web + 5 ft traditional)
QLK-150 Version	QS99007

Frequently Asked Questions

Is professional installation required? +

Yes. Q'Straint QLK components must be installed by a certified WAV modifier. Improper installation may void the warranty.

What is the warranty? +

Q'Straint offers a 3-year limited warranty when the product is registered at qstraint.com. Without registration, a 1-year limited warranty applies.

Need help finding the right part? +

Call us at (972) 420-0800 or email sales@wheelchairstrap.com and our team will confirm compatibility before you order.

Questions about compatibility or installation?

Our team can help confirm the right parts for your system.

📞 (972) 420-0800 ✉ sales@wheelchairstrap.com

Back to All Products

Adjust text colors

Adjust heading colors

Adjust background colors