What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

QRT Standard Semi - Automatic, retractor wheelchair tie down Lap & Shoulder Belt | Q - 8200 - AT - L - WheelchairStrap.com

QRT Standard Semi-Automatic, retractor wheelchair tie down system Lap & Shoulder Belt | Q-8200-AT-L

Vendor: Q'Straint
Regular price: $517.00
Sale price: $517.00
Unit price: per

Shipping calculated at checkout.

QRT Standard Semi-Automatic, retractor wheelchair tie down system Lap & Shoulder Belt

The Q'Straint QRT Standard Semi-Automatic Retractor System (Q-8200-AT-L) is an economical, complete 4-point wheelchair tie-down kit with lap and shoulder belts designed for vehicles equipped with L-Track anchorages. Featuring semi-automatic retractors with a single tensioning knob, this system secures both wheelchair and occupant in under 10 seconds while meeting all major safety compliance standards

The Q’Straint QRT Standard is the solution for addressing cost-conscious budgets without sacrificing passenger safety. The QRT Standard features a semi-automatic retractor that allows the operator to tension the wheelchair tie-down securement webbing with the single tensioning knob.

Kit Includes:

Qty 4 Q8-6201-L QRT Standard Retractors (L-Track)

Qty 1 Q8-6325-AT Occupant Securement Lap and Shoulder Belt with L-Track Fitting

1-Instruction Adhesive Label

1-QRT Installation Instructions

1-Instruction Guide for Operator

1-Warranty Card (2-Year Manufacture Warranty)

Key Features:

⚡ Semi-Automatic Retractor System

Semi-automatic retractors tension wheelchair tie-down webbing automatically with minimal operator effort

Single tensioning knob for quick, easy securement in under 10 seconds

Self-tensioning continuously takes up slack during transit for maintained securement

Economical solution that meets minimum specifications without sacrificing safety

🛡️ Complete 4-Point Securement

(4) QRT Standard Retractors with L-Track fittings included

Manual Lap & Shoulder Belt for occupant restraint (traditional seat belt system)

Secures wheelchair to vehicle frame at four anchor points

Lap and shoulder belts work together to keep passenger safely in chair during sudden stops or impacts

✅ Full Compliance Certification

Fully ADA Compliant

Meets major safety standards:

SAE J2249 (Wheelchair Tie-Down & Occupant Restraint Systems)
AS 2596 (Australian Standard)
CSA Z605 (Canadian Standard)
ISO 10542 (International Standard)
FMVSS 209, 302, 210, 222 (Federal Motor Vehicle Safety Standards)
CMVSS 209 (Canadian Motor Vehicle Safety Standard)

QRT Standard Semi-Automatic, retractor wheelchair tie down system Lap & Shoulder Belt | Q-8200-AT-L

QRT Standard Semi-Automatic, retractor wheelchair tie down system Lap & Shoulder Belt

⚡ Semi-Automatic Retractor System

🛡️ Complete 4-Point Securement

🔧 L-Track Mounting

✅ Full Compliance Certification

💰 Cost-Effective Design