What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Slip in Cane Holster Scooter Armrest Mount | W007S

Vendor: SnapIt!
Regular price: $39.00
Sale price: $39.00
Unit price: per

Shipping calculated at checkout.

The SnapIt! Slip in Cane Holster Scooter Armrest Mount (SKU: W007S) gives mobility aid users a convenient, hands-free way to carry their cane on their scooter armrest. No more balancing your cane across your lap or setting it on the floor.

WheelchairStrap.com — SnapIt! Products

Slip in Cane Holster Scooter Armrest Mount | W007S

🚚 Free Shipping on Orders Over $100🏭 Made in Texas, USA🔓 SKU: W007S

$39.00

Key Features

✋

SAFER RIDING! The perfect item to free hands to ensure your safety.

⚙

Conveniently and securely carry your cane or umbrella when using your power chair or scooter! Cane Holster mounts to 13/16” and 1” square tubing commonly found on scooters and powerchair armrest supports. All mounting hardware included.

⚙

UV Stabilized Polymer will not mar surfaces of cane and does not rattle. Adjustable mounting position.

✅

Special order item only - Non-Returnable .

✅

I.D. 2 1/4” Overall Height 14”

⚙

UV Stabilized HDPE (High-Density Polyethylene)

⚙

Stainless Steel Hardware

🇺🇸

Manufactured and Assembled in Texas, USA

What's Included

Item	Detail
1x Cane Holster	SKU: W007S

Compatible Devices & Applications

Walkers and rollators
Manual wheelchairs
7/8" and 1" diameter canes

Specifications

Spec	Value
SKU	W007S
Price	$39.00
Diameter	7/8" or 1"
Mount	Snap-in or slip-in
Material	nylon; metal

Frequently Asked Questions

What cane diameter does this holster fit?

Size options are available for 7/8" and 1" diameter cane shafts. Select the correct size from the dropdown. For folding canes, check the shaft diameter near the bottom of the cane.

Does this work on walkers and wheelchairs?

Yes. The holster is compatible with walkers and wheelchairs. Check the specific product variant for your application.

How is the holster attached to my device?

The holster uses a SnapIt! bracket system or direct mount hardware. Full installation instructions are included with your order.

Is the cane fully secure while moving?

Yes. The holster is designed to hold the cane securely during normal movement. The snap-in design provides extra retention on rough terrain.

Related Products

Snap-In Cane Holster Walker Adjustable Drink Holder MultiMount Bracket

Questions? We're Here to Help.

Serving wheelchair and mobility aid users nationwide from Carrollton, TX.

Back to All Products

Adjust text colors

Adjust heading colors

Adjust background colors