What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Q5 - 7583 - A | Q’Straint Scooter / Tri - Wheeler Securement Kit - WheelchairStrap.com

Q’Straint | Scooter / Tri-Wheeler Securement Kit | Q5-7583-A

Vendor: Q'Straint
Regular price: $36.95
Sale price: $36.95
Unit price: per

Shipping calculated at checkout.

The Q’Straint Q5-7583-A Tri-Wheeler Securement Kit bundles two purpose-built scooter webbing straps into a single kit — giving operators a 1″ O-ring strap for larger frame sections and a 2″ D-ring strap for narrower frame points. Together they create the solid attachment points needed to tie down a mobility scooter or tri-wheeler using standard 4-point wheelchair retractors. This kit secures the device only; a separate occupant lap belt and shoulder belt are required for passenger protection.

SKU: Q5-7583-A | VENDOR: Q’STRAINT

Q’Straint Scooter / Tri-Wheeler Securement Kit | Q5-7583-A — 2-Piece Webbing Kit with O-Ring & D-Ring for Scooter Transport

🚚 Free Shipping on Orders Over $100 ⚡ 2-Piece Scooter & Tri-Wheeler Kit 🏷 Q’Straint

⚠️ Key Usage Note — Device Securement Only

This kit is strictly intended for securing the scooter or tri-wheeler only. It is not designed to secure the occupant. A separate occupant restraint system — lap belt and shoulder belt — must always be used to protect the passenger during transport.

Key Features

📦

Two-Strap Kit — O-Ring & D-Ring

Includes both the 1″ O-ring strap (Q5-7583) and 2″ D-ring strap (Q5-7583-2) — a complete set of scooter tiedown attachment points in one purchase.

🔘

1″ O-Ring Strap — 22.5″ Loop

Longer loop length accommodates larger scooter frame sections; O-ring creates a low-profile retractor attachment point where clearance is limited.

🔗

2″ D-Ring Strap — 11.5″ Loop

Wider webbing distributes load across the frame; compact loop fits snugly around narrower frame sections; D-ring accepts standard J-hook and flat-hook retractor ends.

🔒

Works with Standard 4-Point Retractors

Compatible with Q’Straint QRT retractors and most standard wheelchair tie-down systems — retractors attach to the O-ring and D-ring hardware.

⚗️

Tool-Free, No Permanent Modification

Both straps wrap around the scooter frame without drilling or permanent hardware — quick to apply and remove at each boarding cycle.

⏥️

Designed for Scooters & Tri-Wheelers

Purpose-built for 3-wheeled mobility scooters and tri-wheelers that lack conventional wheelchair tiedown points — accommodates varying frame geometries with two strap sizes.

What’s Included

Qty	SKU	Component
1	Q5-7583	1″ Black Tri-Wheeler Webbing Belt with Metal O-Ring Black webbing, 1″ wide x 22.5″ loop length; metal O-ring; fits larger scooter frame sections
1	Q5-7583-2	2″ Black Tri-Wheeler Webbing Belt with Metal D-Ring Black webbing, 2″ wide x 11.5″ loop length; metal D-ring; compact fit for narrower frame points

⚠ Retractors, lap belt, and shoulder belt are not included. Must be purchased separately for a complete securement position.

Full Feature Details

Mobility scooters and tri-wheelers lack the standard tiedown brackets found on conventional wheelchairs. The Q5-7583-A addresses this with two complementary webbing straps — a 1″ O-ring strap for larger frame sections and a 2″ D-ring strap for narrower sections — creating the attachment points needed for a standard 4-point wheelchair securement system. Operators can apply both straps to different areas of the scooter frame to achieve a balanced, stable four-point tie-down using the vehicle’s existing retractors.

Feature	Description
Q5-7583 — Webbing Width	1 inch
Q5-7583 — Loop Length	22.5 inches with metal O-ring — longer loop for larger scooter frame sections
Q5-7583-2 — Webbing Width	2 inches — wider webbing distributes force across the frame
Q5-7583-2 — Loop Length	11.5 inches with metal D-ring — compact fit for narrower frame sections
Color	Black webbing, metal ring hardware (both straps)
Compatible Retractors	Works with Q’Straint QRT retractors and standard 4-point wheelchair tie-down systems; retractors hook to the O-ring and D-ring hardware; retractors sold separately
Compatible Devices	3-wheeled mobility scooters and tri-wheelers without built-in wheelchair tiedown points
Occupant Restraint	Not included and not provided by this kit. A separate lap belt and shoulder belt are required for passenger protection
Quantity	2 straps per kit (1x Q5-7583 O-ring strap + 1x Q5-7583-2 D-ring strap)

Vehicle Applications

🚐 Wheelchair-Accessible Van (WAV) 🚑 Non-Emergency Medical Transport (NEMT) 🚕 Paratransit / Transit Bus 🚖 School Bus 🚗 Personal Vehicle / Minivan

Standards & Compliance

This product is a webbing accessory designed to create tiedown attachment points on mobility scooters. It is intended for use as part of a compliant 4-point wheelchair securement system; the complete securement position must meet applicable standards when retractors and occupant restraint components are included. For per-vehicle and per-application compliance documentation, visit our Compliance Resource Center.

ℹ️ ADA Compliance Note: This product is designed for use in ADA-accessible transportation. Verify that the complete securement position — including retractors and occupant restraints — meets applicable ADA requirements for your specific vehicle type.

🛡 Warranty: 1-year limited (Q’Straint accessory products). Registration recommended at qstraint.com. Verify full warranty terms at wheelchairstrap.com/pages/warranty-information.

📄 Installation & User Guides: View Q’Straint Installation & User Guide List

Specifications

Specification	Detail
Brand	Q’Straint
Kit SKU	Q5-7583-A
Quantity per Kit	2 straps (1x O-ring strap + 1x D-ring strap)
Strap 1 (Q5-7583)	1″ wide x 22.5″ loop — black webbing with metal O-ring
Strap 2 (Q5-7583-2)	2″ wide x 11.5″ loop — black webbing with metal D-ring
Application	Scooter & tri-wheeler device securement only — occupant restraint not provided
Price	$31.00
Shipping	Free Shipping on Orders Over $100
Warranty	1-year limited

Frequently Asked Questions

What is the difference between this kit and the Q5-7583-2 sold separately? +

The Q5-7583-A bundles two straps: the Q5-7583 (1″ x 22.5″ with O-ring) and the Q5-7583-2 (2″ x 11.5″ with D-ring). The Q5-7583-2 is also sold individually if you only need the 2″ D-ring strap. The kit is the best value when you need both strap types to address different attachment point locations on a scooter.

Does this kit include retractors or occupant belts? +

No. The Q5-7583-A provides only the two webbing straps. You still need 4-point retractors to secure the scooter to the vehicle floor, and a separate lap belt and shoulder belt for the passenger. See our Q’Straint wheelchair restraints and occupant restraints collections for compatible components.

How many kits do I need per scooter position? +

One Q5-7583-A kit provides two strap attachment points. For a standard 4-point tie-down position, you will typically need two kits (four attachment points total) or a combination of this kit and additional individual straps depending on your scooter’s frame geometry. For fleet orders of 5 or more vehicles, request a fleet quote.

Will the O-ring and D-ring work with my existing retractor hooks? +

Both rings are designed to accept standard retractor hook ends including J-hooks and flat hooks common to Q’Straint QRT systems. If you have questions about compatibility with a specific retractor model, contact us at 800.884.6456 before ordering.