What is a 4-point wheelchair tie-down system?

A 4-point tie-down uses four retractors or straps — two at the front and two at the rear of the wheelchair — to secure the chair to the vehicle floor. When combined with a lap and shoulder belt for the occupant, it meets federal ADA and WC18 securement standards for paratransit, NEMT, and school bus transport.

Is wheelchair securement required by law?

Yes. The Americans with Disabilities Act (ADA) requires that all public transit vehicles equipped to transport wheelchair users must have an approved securement system. NEMT providers, paratransit operators, and school bus fleets are all subject to federal and state securement regulations. Failure to comply can result in fines and significant liability in the event of an accident.

What does WC18 compliant mean?

WC18 is the RESNA/ANSI standard that defines performance requirements for wheelchair tie-down and occupant restraint systems (WTORS). WC18-compliant products have been crash-tested to withstand higher load forces than previous standards, providing greater protection for wheelchair users in the event of a collision or sudden stop.

Which wheelchair securement brands do you carry?

We are an authorized dealer for Q'Straint, AMF Bruns, and Sure-Lok — the three leading manufacturers of wheelchair tie-down and occupant restraint systems worldwide. All products meet or exceed WC18 compliance standards where applicable.

What is the difference between an L-track and a Slide N' Click system?

L-track is a recessed floor channel that accepts fittings at any point along its length, giving installers maximum flexibility in retractor placement. Slide N' Click is Q'Straint's proprietary system using pre-set anchor points that allow faster, tool-free securement — popular in high-volume paratransit operations where speed of securement matters.

What is the difference between a manual and retractable wheelchair strap?

Manual straps are fixed-length webbing straps with a hook or loop connection — simple, affordable, and reliable. Retractable systems use a spring-loaded mechanism to automatically take up slack, making securement faster and reducing trip hazards from loose webbing. Electric retractors add powered retraction, ideal for operators or drivers with limited hand strength or mobility.

Do you offer fleet pricing for multiple vehicles?

Yes. We offer fleet pricing for operators outfitting five or more vehicles. Submit your vehicle count, vehicle type, and preferred brand through our Fleet Quote form and a specialist will respond within one business day.

Do your products come with installation instructions?

Yes. All products ship with manufacturer installation guides. We also maintain a full library of installation and user guides on our website for Q'Straint, AMF Bruns, and Sure-Lok products. Our specialists are also available by phone at 800.884.6456 if you need installation support at no charge.

FREE STANDARD SHIPPING ON ORDERS OVER $100 - 800.884.6456

Q5 - 7583 - 2 | Q’Straint Scooter Securement Kit - WheelchairStrap.com

Q’Straint | Scooter Securement Kit | Q5-7583-2

Vendor: Q'Straint
Regular price: $18.00
Sale price: $18.00
Unit price: per

Shipping calculated at checkout.

The Q’Straint Q5-7583-2 Scooter Securement Kit creates a reliable attachment point on a scooter or tri-wheeler frame so it can be secured with standard 4-point wheelchair tie-down retractors during vehicle transport. A 2″ black webbing belt wraps around the scooter frame and a metal D-ring provides the hook point for retractor straps. This product secures the device only — a separate occupant lap and shoulder belt system is required to protect the passenger.

SKU: Q5-7583-2 | VENDOR: Q’STRAINT

Q’Straint Scooter Securement Kit | Q5-7583-2 — 2″ Black Webbing Belt with Metal D-Ring for Scooter & Tri-Wheeler Transport

🚚 Free Shipping on Orders Over $100 ⚡ Scooter & Tri-Wheeler Securement 🏷 Q’Straint

⚠️ Key Usage Note — Device Securement Only

This kit is strictly intended for securing the scooter or tri-wheeler only. It is not designed to secure the occupant. A separate occupant restraint system — lap belt and shoulder belt — must always be used to protect the passenger during transport.

Key Features

🔗

Metal D-Ring Attachment Point

Creates a solid, stable hook point on the scooter frame for standard 4-point retractor straps — no drilling or permanent modification required.

🪝

2″ Heavy-Duty Black Webbing

Wide, durable polyester webbing distributes load across the scooter frame for a secure wrap without damaging the mobility device.

📏

Compact 11.5″ Profile

Sized to fit snugly around most scooter and tri-wheeler frames without bulk or interference with the device’s operation.

🔒

Works with Standard 4-Point Retractors

Compatible with Q’Straint QRT retractors and most standard wheelchair tie-down systems — the D-ring accepts standard J-hook and flat-hook retractor ends.

⚗️

Simple, Tool-Free Setup

Wraps around the scooter frame and cinches in place — no tools or permanent hardware required for quick boarding cycle application.

⏥️

Designed for Scooters & Tri-Wheelers

Purpose-built for 3-wheeled mobility scooters and tri-wheelers where a conventional wheelchair frame tiedown point is not available.

What’s Included

Qty	SKU	Component
1	Q5-7583-2	2″ Black Tri-Wheeler Webbing Belt with Metal D-Ring Black webbing, 2″ wide x 11.5″ loop length; metal D-ring included; device securement only — occupant restraint not included

⚠ Retractors, lap belt, and shoulder belt are not included and must be purchased separately for a complete securement position.

Full Feature Details

Mobility scooters and tri-wheelers often lack the standard tiedown attachment points found on conventional wheelchairs. The Q5-7583-2 solves this by wrapping a 2″ black webbing belt around the scooter frame to form a loop, with a metal D-ring providing the hook point for retractor straps. This allows operators to use standard 4-point wheelchair securement retractors to tie down the scooter — creating a consistent securement process across mixed fleets of wheelchairs and scooters.

Feature	Description
Webbing Width	2 inches — wide strap distributes force across the scooter frame
Webbing Length	11.5 inches loop with D-ring — compact fit around most scooter frames
Color	Black webbing with metal D-ring hardware
Hardware	Metal D-ring creates the attachment point for retractor hooks — accepts standard J-hook and flat-hook retractor ends
Compatible Devices	3-wheeled mobility scooters, tri-wheelers, and similar mobility devices without built-in tiedown points
Compatible Retractors	Works with Q’Straint QRT retractors and standard 4-point wheelchair tie-down systems; retractors sold separately
Occupant Restraint	Not included and not provided by this kit. A separate lap belt and shoulder belt must be used for passenger protection during transport
Quantity	1 webbing belt with D-ring per kit — order the quantity needed to match the number of securement points at each position

Vehicle Applications

🚐 Wheelchair-Accessible Van (WAV) 🚑 Non-Emergency Medical Transport (NEMT) 🚕 Paratransit / Transit Bus 🚖 School Bus 🚗 Personal Vehicle / Minivan

Standards & Compliance

This product is a webbing accessory designed to create a tiedown attachment point on mobility scooters. It is intended for use as part of a compliant 4-point wheelchair securement system — the securement position overall must meet applicable standards when the retractors and occupant restraint components are included. For per-vehicle and per-application compliance documentation requirements, visit our Compliance Resource Center.

ℹ️ ADA Compliance Note: This product is designed for use in ADA-accessible transportation. Verify that the complete securement position — including retractors and occupant restraints — meets applicable ADA requirements for your specific vehicle type.

🛡 Warranty: 1-year limited (Q’Straint accessory products). Registration recommended at qstraint.com. Verify full warranty terms at wheelchairstrap.com/pages/warranty-information.

📄 Installation & User Guides: View Q’Straint Installation & User Guide List

Specifications

Specification	Detail
Brand	Q’Straint
SKU	Q5-7583-2
Webbing Width	2 inches
Length	11.5 inches with D-ring
Color	Black
Hardware	Metal D-ring
Application	Scooter & tri-wheeler device securement only — occupant restraint not provided
Quantity per Kit	1
Price	$18.00
Shipping	Free Shipping on Orders Over $100
Warranty	1-year limited

Frequently Asked Questions

Does this kit include retractors or occupant belts? +

No. The Q5-7583-2 is a single webbing belt with D-ring that creates an attachment point on the scooter frame. You will still need 4-point retractors to secure the scooter to the vehicle floor, and a separate lap belt and shoulder belt to restrain the occupant. See our Q’Straint wheelchair restraints collection and occupant restraints collection for compatible components.

Will this work with my existing Q’Straint retractors? +

Yes. The metal D-ring on the Q5-7583-2 accepts standard retractor hook ends including J-hooks and flat hooks used with Q’Straint QRT retractors. If you are unsure about compatibility with your specific retractor model, contact us at 800.884.6456 and we’ll confirm before you order.

How many kits do I need per scooter? +

This depends on how many retractor points you are securing to the scooter. A standard 4-point tie-down typically requires up to 4 attachment points. Order the quantity that matches your securement configuration. For fleet orders with 5 or more vehicles, request a fleet quote.

Is this product compatible with wheelchairs as well as scooters? +

This kit is specifically designed for scooters and tri-wheelers that lack standard wheelchair tiedown points. Most manual and power wheelchairs have built-in tiedown brackets that work directly with retractors. If you need securement accessories for a conventional wheelchair, contact us to discuss options.